Phone-Watch Connection
Q1
I can’t establish a connection
between the phone and watch.
Have you tried turning your phone off and
then back on again?
Turn the phone off and then back on, and
then tap the “G-SHOCK Connected” icon.
Next, on the watch, hold down (C) for at
least 1.5 seconds. Release the button
when [CONNECT] starts to flash.
Has the watch been re-paired with the
phone?
After deleting pairing information from G-
SHOCK Connected, re-pair them.
l
If you are unable to establish a
connection...
Use the procedure below to delete the
pairing information from the watch, and
then re-pair the watch and phone.
A
Hold down (D) for at least two seconds
to enter the Timekeeping Mode.
B
Hold down (A) for at least two seconds
until the name of the currently selected
Home City is displayed.
C
Press (D) twice so the seconds digits
are flashing.
D
Hold down (B) for at least 2 seconds.
Release it when [CLR] stops flashing. This
deletes the pairing information from the
watch.
E
Press (A) to exit the setting screen.
Changing to a Different
Phone Model
Q1
Connecting the current watch to
another phone.
Pair the watch with the phone.
l
Auto Time Adjustment by
Bluetooth Connection (Time
Adjustment)
Q1
When does the watch adjust its time?
The watch will connect with the phone and
perform auto time adjustment at around 12:30
a.m., 6:30 a.m., 12:30 p.m. and 6:30 p.m. The
connection is automatically terminated after
auto time adjustment is complete.
Q2
Auto time adjustment is not
performed at a scheduled time.
Is auto time adjustment not being
performed according to its normal
schedule?
Note that auto time adjustment is not
performed for 24 hours after swapping of
the Home Time and World Time, or after
the time setting is adjusted manually on
the watch. Auto time adjustment will
resume 24 hours after either of the above
operations is performed.
Is a stopwatch or timer operation being
performed?
Auto time adjustment will not start at the
scheduled times if a stopwatch or timer
operation is in progress. Stop the
stopwatch or timer operation.
l
l
Is auto time adjustment enabled?
Auto time adjustment will not be
performed at the scheduled times unless
it is enabled. Enable auto time
adjustment.
l
Using G-SHOCK Connected to
Configure Settings
l
Using Watch Operations to Configure
Settings
Q3
The watch does not show the correct
time even after (C) is pressed.
The watch will not adjust its time if you press
(C) while a stopwatch or timer operation is in
progress. Stop the stopwatch or timer
operation and then press (C) again.
Q4
Time is not displayed correctly.
If your phone is unable to receive a signal
because you are outside its service range or
cannot connect to a network for some other
reason, the watch may not display the correct
time. If this happens, connect the phone to a
network and then perform the time adjustment
operation.
Alarms
Q1
The alarm does not sound.
Is the watch’s battery charged?
Keep the watch exposed to light until it
recharges sufficiently.
l
Is the alarm enabled?
Enable the alarm.
l
Turning Off an Alarm or the Hourly
Time Signal
Operation Guide 5608
22