E-31
To do this:
Enter this mode:
See:
View the current time in 48 cities (31 time zones) and UTC (Universal Time
Coordinated) time
World Time Mode
E-112
•
Perform a manual time calibration signal receive operation
•
Check whether the last receive operation was successful
•
Confi gure auto receive settings
Receive Mode
E-20
E-30
Mode Reference Guide
Your watch has 14 “modes”. The mode you should select depends on what you want to do.
To do this:
Enter this mode:
See:
•
View the current time and date in the Home City
•
Confi gure Home City and daylight saving time (DST) settings
•
Confi gure time and date settings manually
•
Enable auto signal reception
Timekeeping Mode
E-35
Determine your current bearing or the direction from your current location to a
destination
Digital Compass Mode
E-44
•
View the altitude at your current location
•
Determine the altitude differential between two locations (reference point and
current location)
•
Record an altitude reading with the reading time and date
Altimeter Mode
E-59
•
View the barometric pressure at your current location
•
View a graph of barometric pressure readings
•
Enable alerts (display and beep) for noteworthy changes in barometric pressure
Barometer Mode
E-75
View the temperature at your current location
Thermometer Mode
E-84
Recall records created in the Altimeter Mode
Data Recall Mode
E-87
View the Tide Graph and Moon age for the currently specifi ed date and time
Tide/Moon Data Mode
E-91
View good fi shing times on a specifi ed date
Fishing Mode
E-97
View the sunrise and sunset times for a specifi c date
Sunrise/Sunset Mode
E-102
Use the stopwatch to measure elapsed time
Stopwatch Mode
E-105
Use the countdown timer
Countdown Timer Mode E-107
Set an alarm time
Alarm Mode
E-109
E-29
•
The receive operation is disabled under any of the conditions below.
– While power is at Level 3 (
L
) or lower (page E-15)
– While the watch is in the power recovery mode (page E-17)
– While a direction, barometric pressure, temperature, or altitude reading operation is in progress
– While the watch is in the function sleep state (“Power Saving”, page E-19)
– While barometric pressure change indicator is being measured
– While a countdown timer operation is in progress (page E-107)
•
A receive operation is cancelled if an alarm sounds while it is being performed.
•
The Home City setting reverts to the initial default of
TYO
(Tokyo) whenever the battery power level
drops to Level 5 or when you have the rechargeable battery replaced. If this happens, change the
Home City to the setting you want (page E-36).
E-28
To turn auto receive on or off
1. Enter the Receive Mode (page E-32).
•
R/C
will be displayed for about one second, and then the date (month and day) and the time of the
last signal reception will alternate on the digital display.
•
Dashes (
- : - -
and
-.- -
) alternating in place of the date and time indicate there has been no
successful signal reception yet (since you purchased the watch or had its battery replaced).
2. Pull out the crown. This will cause the current auto receive status (
ON
or
OFF
) to fl ash on the digital
display.
•
Only
AUTORC OFF
is displayed for cities that do not support time calibration signal reception.
AUTORC ON
is not displayed.
3. Rotate the crown to select either auto receive on (
ON
) or auto receive off (
OFF
).
4. After the setting is the way you want, push the crown back in. This will return to the screen that was
displayed in step 1 of this procedure.
Radio-controlled Atomic Timekeeping Precautions
•
Strong electrostatic charge can result in the wrong time setting.
•
Even if a receive operation is successful, certain conditions can cause the time setting to be off by up
to one second.
•
The watch is designed to update the date and day of the week automatically for the period January 1,
2000 to December 31, 2099. Updating of the date by signal reception will no longer be performed
starting from January 1, 2100.
•
If you are in an area where signal reception is not possible, the watch keeps time with the precision
noted in “Specifi cations”.
E-27
To check the latest signal reception results
1. Enter the Receive Mode (page E-32).
2.
R/C
will be displayed for about one second, and then the date (month and day) and the time of the last
signal reception will alternate on the digital display at two second intervals.
•
Dashes (
- : - -
and
-.- -
) alternating in place of the date and time indicate there has been no
successful signal reception yet (since you purchased the watch or had its battery replaced).
2 seconds
3. To return to the Timekeeping Mode, press
B
.
E-26
Signal Level Indicator
During calibration signal reception, the signal level indicator displays the
signal level as shown below.
Weak (Unstable)
Strong (Stable)
The level indication will change in accordance with reception conditions
while reception is being performed.
As you watch the indicator, keep the watch in a location that best
maintains stable reception.
•
Even under optimum reception conditions, it can take about 10
seconds for reception to stabilize.
•
Note that weather, the time of day, surroundings, and other factors all
can affect reception.
E-25
Receive failed
E-24
•
You can use the procedure under “To turn auto receive on or off” (page E-28) to enable or disable auto
receive.
To perform manual receive
1. Use
B
to enter the Receive Mode (
R/C
) as shown on page E-32.
2. Hold down
A
for at least two seconds until
RC
fl ashes and then
RC!
appears on the digital display.
•
A signal level indicator (
L1
,
L2
, or
L3
, see page E-26) will appear
on the display after reception starts. Do not allow the watch to
move and do not perform any button operation until
GET
or
ERR
appears on the display.
•
If the receive operation is successful, the reception date and time
appear on the display, along with the
GET
indicator.
•
The watch will return to the Timekeeping Mode if you do not
perform any button operation for about two or three minutes.
Receiving
Receiving indicator
Receive successful
2 seconds
Operation Guide 5480