E-111
To turn an alarm and the Hourly Time Signal on and off
1. In the Alarm Mode, use
A
and
C
to select an alarm or the Hourly Time Signal.
2. When the alarm or the Hourly Time Signal you want is selected, press
D
to turn it on and off.
•
The alarm on indicator (when any alarm is on), and the Hourly Time
Signal on indicator (when the Hourly Time Signal is on) are shown
on the display in all modes.
To stop the alarm tone
Press any button.
To test the alarm tone
In the Alarm Mode, hold down
A
to sound the alarm tone.
Hourly time signal
on indicator
Alarm on indicator
E-110
To set an alarm time
1. In the Alarm Mode, use
A
and
C
to scroll through the alarm screens
until the one whose time you want to set is displayed.
AL1
AL2
AL3
SIG*
AL5
AL4
* There is no time setting for the hourly time signal.
2. Pull out the crown.
•
This will cause the hour and minute digits of the alarm time to fl ash.
3. Rotate the crown to adjust the minute setting.
•
Hour setting will change in accordance with minute setting changes.
4. Press
B
.
5. Rotate the crown to adjust the hour setting.
•
If you are using 12-hour timekeeping, the
P
(p.m.) and
A
(a.m.) indicators will also appear on the
display.
6. After the settings are the way you want, push the crown back in.
•
Setting an alarm time causes that alarm to turn on automatically.
Alarm ON/OFF indicator
E-109
Using the Alarm
You can set fi ve independent daily alarms. When an alarm is turned on,
an alarm will sound for about 10 seconds each day when the time in the
Timekeeping Mode reaches the preset alarm time. This is true even if the
watch is not in the Timekeeping Mode.
You can also turn on an Hourly Time Signal, which will cause the watch
to beep twice every hour on the hour.
To enter the Alarm Mode
Use
B
to select the Alarm Mode (
ALARM
) as shown on page E-32.
•
About one second after
ALARM
appears on the display, the display
will change to show an alarm name (
AL1
through
AL5
) or the
SIG
indicator. The alarm name indicates an alarm screen.
SIG
is shown
when the Hourly Time Signal screen is on the display.
•
When you enter the Alarm Mode, the data you were viewing when you
last exited the mode appears fi rst.
Alarm time
(Hour : Minutes)
Alarm name
(AL or SIG)
E-108
To perform a countdown timer operation
A
A
A
A
C
Start
Stop
(Resume)
(Stop)
Reset
•
An alarm sounds for ten seconds when the end of the countdown is reached. This alarm will sound in
all modes. The countdown time is reset to its starting value automatically after the alarm ends.
To stop the alarm
Press any button.
E-107
Using the Countdown Timer
The countdown timer can be confi gured to start at a preset time, and sound an alarm when the end of the
countdown is reached.
To enter the Countdown Timer Mode
Use
B
to select the Countdown Timer Mode (
TIMER
) as shown on page
E-32.
•
About one second after
TIMER
appears on the display, the display will
change to show the countdown time hours.
To specify the countdown start time
1. Enter the Countdown Timer Mode.
2. Pull out the crown.
•
This will cause the current start time minutes digits to fl ash on the
digital display.
3. Rotate the crown to adjust the minutes setting.
4. After the setting is the way you want, push the crown back in.
Current time
Countdown time
(Minutes, seconds)
E-106
To measure two fi nishes
A
C
A
C
C
Start
Split
First runner fi nishes.
(
SP
appears on the
digital display.)
Display time of fi rst
runner
Stop
Second runner
fi nishes.
Split release
Display time of
second runner
Reset
Note
•
The Stopwatch Mode can indicate elapsed time up to 23 hours, 59 minutes, 59.99 seconds.
•
An ongoing elapsed time measurement operation will continue internally even if you change to another
mode. However, if you exit the Stopwatch Mode while a split time is displayed, the split time will not be
displayed when you return to the Stopwatch Mode.
E-105
Using the Stopwatch
The stopwatch measures elapsed time, split times, and two fi nishes.
To enter the Stopwatch Mode
Use
B
to select the Stopwatch Mode (
STW
) as shown on page E-32.
To perform an elapsed time operation
A
A
A
A
C
Start
Stop
(Resume)
(Stop)
Reset
To pause at a split time
A
C
C
A
C
Start
Split
(
SP
appears on
the digital
display.)
Split release
Stop
Reset
Current time
1/100 second
Hours
Seconds
Minutes
E-104
1. In the Timekeeping Mode, pull the crown out.
•
This indicates the city code setting mode.
2. Rotate the crown to select the city code nearest the location whose
sunrise and sunset times you want to check.
•
If you do not need to specify a longitude and latitude, jump to step
7 here.
3. Press
B
twice to switch to the latitude setting screen.
4. Rotate the crown to adjust the latitude setting.
•
Latitude can be specifi ed in the range shown below.
65.0°S (65.0 degrees south latitude) to 0°N to 65.0° (65.0 degrees
north latitude)
5. Press
B
to switch to the longitude setting screen.
6. Rotate the crown to adjust the longitude setting.
•
Longitude can be specifi ed in the range shown below.
179.9°W (179.9 degrees west longitude) to 0°E to 180.0°E (180.0
degrees east longitude)
7. Push the crown back in.
8. Use
B
to select the Sunrise/Sunset Mode as shown on page E-32.
•
This displays the sunrise/sunset times of the location you
specifi ed.
lll
ll
l
ll
l l
l l l l
Latitude
l
l
l
l
l
l
ll
l
l
l l l
l
l
Longitude
Operation Guide 5480