Casio 5429, Руководство по эксплуатации, Страница: 6 / 15

Swapping Your Current Location
Time and World Time
1.
Y
Tap the “CASIO WATCH+” icon.
2.
X
Hold down (C) for about 0.5 seconds
until the second hand points to R.
The second hand will move to
e
when a
connection is established between the
watch and phone.
3.
Y
Tap “World time”.
4.
Y
Tap “Home time
k
World time”.
5.
Perform the operation shown on the
phone screen to swap your current
location time with the World Time.
●
In the Calendar Mode, you can check
the World Time with the watch’s small
hour hand and minute hand.
30 30
n
Current location time
Current location time
After swapping Before swapping
World Time
World Time
Note
●
This function comes in handy when
you need to move to another time
zone. For details about how to use it,
see “
Moving to Another Time Zone ”.
Setting the Alarm
1.
Y
Tap the “CASIO WATCH+” icon.
2.
X
Hold down (C) for about 0.5 seconds
until the second hand points to the R mark.
The second hand will move to
e
when a
connection is established between the
watch and phone.
3.
Y
Tap “Alarm”.
4.
Y
Perform the operation shown on the
phone screen.
Adjusting Hand Alignment
If the hands are out of alignment even though
auto time adjustment is being performed, use
CASIO WATCH+ to adjust them.
1.
Y
Tap the “CASIO WATCH+” icon.
2.
X
Hold down (C) for about 0.5 seconds
until the second hand points to the R mark.
The second hand will move to
e
when a
connection is established between the
watch and phone.
3.
Y
Tap in the following sequence:
f n
“Watch settings”.
4.
Y
Tap “Adjusting home positions”.
5.
Y
Perform the operation shown on the
phone screen.
Phone Finder
You can use phone finder to trigger a tone on
the phone to make it easy to find. The tone is
forced to sound even if the phone is in the
manner mode.
Important!
●
Do not use this function in areas
where phone call tones are
restricted.
●
The tone sounds at a high volume.
Do not use this function when
listening to phone output over
earphones.
1.
X
If the watch is connected with a phone,
press (C) to terminate the connection.
30 30
n
After disconnection Connected
2.
X
Hold down (A) for about two seconds.
This will cause the watch to enter the
Calendar Mode.
30
3.
X
Hold down (D) for about 0.5 seconds.
This will cause the watch’s second hand
to move to
e
and the phone will sound a
tone.
●
It will take a few seconds before the
phone tone sounds.
4.
X
Press any button to stop the tone.
●
You can press any watch button to stop
the phone tone only during the first 30
seconds after it starts to sound.
Operation Guide 5429
6