manualshive.com logo in svg

Casio 4359, Руководство пользователя, Страница: 64 / 82

Поделиться
Скачать
Casio 4359 Скачать руководство пользователя страница 64

E-63

•

 The letters “UTC” is the abbreviation for “Universal Time Coordinated”, which is the

world-wide scientific standard of timekeeping. It is based upon carefully maintained
atomic (cesium) clocks that keep time accurately to within microseconds. Leap
seconds are added or subtracted as necessary to keep UTC in sync with the Earth’s
rotation.

12-hour/24-hour Timekeeping  Formats

The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode also is
applied in all other modes.

•

When you are using 12-hour timekeeping, a PM indicator (

PM

) appears in the upper

left display between noon and 11:59 p.m. No indicator is displayed between midnight
and 11:59 a.m.

•

With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without
any indicator.

Illumination Precautions

•

Illumination may be hard to see when viewed under direct sunlight.

•

Illumination turns off automatically whenever an alarm sounds.

•

Frequent use of illumination runs down the battery.

Содержание 4359



















































































Отзывы:

Нет отзывов