Configuring the Auto Light
Setting
1.
Enter the Timekeeping Mode.
l
2.
Hold down (B) for about three seconds.
●
Each time (B) is held down for about
three seconds, Auto Light will toggle
between enabled and disabled.
Disabled
Enabled
Specifying the Illumination
Duration
You can select either two seconds or four
seconds as the illumination duration.
1.
Enter the Timekeeping Mode.
l
2.
Hold down (A) for about two seconds until
[HT] flashes.
3.
Press (C) 12 times to display [LIGHT].
4.
Press (D) to toggle between the two
illumination duration settings.
[2]: 2-second illumination
[4]: 4-second illumination
5.
Press (A) to exit the setting screen.
Other Settings
Getting Ready
Enter the Timekeeping Mode.
l
Enabling the Button
Operation Tone
Use the procedure below to enable or disable
the tone that sounds when you press a button.
1.
Hold down (A) for about two seconds until
[HT] flashes.
2.
Press (C) 11 times.
This causes [KEY♪] or [MUTE] to flash on
the display.
3.
Use (D) to select [KEY♪] or [MUTE].
[KEY♪]: Operation tone is enabled.
[MUTE]: Operation tone is muted.
4.
Press (A) to exit the setting screen.
Note
●
Note that alarm and timer tones will
still sound even while the operation
tone is muted.
Configuring Power Saving
Function Settings
1.
Hold down (A) for about two seconds until
[HT] flashes.
2.
Press (C) 14 times.
This displays [POWER SAVING].
3.
Press (D) to toggle the setting between
enabled (on) and disabled (off).
[ON]: Power Saving enabled.
[OFF]: Power Saving disabled.
4.
Press (A) to exit the setting screen.
Note
●
For details about Power Saving,
refer to the information below.
l
Returning the Watch to Its
Factory Default Settings
You can use the operation below to return
most of the watch’s settings to their initial
factory defaults. Note, however, that it does
not affect the Home City and its summer time
settings.
1.
Hold down (A) for about two seconds until
[HT] flashes.
Operation Guide 3459
16