Casio 3459 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 22

Casio 3459 Скачать руководство пользователя страница 2

Before Getting

Started...

This section provides an overview of your
watch and explains how to connect with a
phone. While there is a connection with a
phone, you can have the watch’s time setting
adjusted in accordance with the phone’s time
setting or change the watch’s time settings.

Note

●

The illustrations included in this
operation guide have been created
to facilitate explanation. An
illustration may differ somewhat
from the item it represents.

Indicators

① ②

⑥

⑦

⑧

④

⑤

③

⑪

⑩

⑨

A

Displayed while Power Saving is enabled.

B

Displayed while Auto Light is enabled.

C

Displayed after time adjustment using
time signal reception or connection with a
phone was successful.

D

Displayed while there is connection
between the watch and a phone.

E

Displayed during p.m. times while 12-hour
timekeeping is being used.

F

Displayed while the watch is indicating
summer time.

G

Displayed while battery power is low

H

Displayed while an alarm is turned on.

I

Displayed while the hourly time signal is
enabled.

J

Displayed while the operation tone is
muted.

K

Displayed while the snooze alarm is
enabled.

Navigating Between Modes

Press (C) to cycle between modes.

●

In any mode, hold down (C) for about one

second to enter the Timekeeping Mode.

C

C

C

C

C

World Time Mode

Alarm Mode

Timer Mode

Stopwatch Mode

Timekeeping Mode

●

Connecting with a Phone

Hold down (C) for about three seconds to

establish a connection with a phone.

●

To disconnect, press any button.

C

After connection

Before connection

Any button

Solar Charging

This watch runs on power supplied from a
rechargeable (secondary) battery that is
charged by a solar panel. The solar panel is
integrated into the face of the watch, and
power is generated whenever the face is
exposed to light.

●

Charging the Watch

When you are not wearing the watch, put it in
a location where it is exposed to bright light.

While you are wearing the watch, make sure
that its face (solar panel) is not blocked from
the light by the sleeve of your clothing. Power
generation efficiency is reduced even when
the face of the watch is blocked only partially.

NO

YES

Important!

●

Depending on light intensity and
local conditions, the watch may
become hot to the touch when
exposed to light for charging. Take
care to avoid burn injury after
charging. Also, avoid charging the
watch under high-temperature
conditions like the ones described
below.

—

On the dashboard of a vehicle
parked in the sun

—

Near an incandescent light bulb or
other source of heat

—

Under direct sunlight or in other
hot areas for long periods

Operation Guide 3459

2

«
1
2
3
4
...
»

Содержание 3459























Отзывы:

Нет отзывов