Operation Guide 3382
8
10.
When all of the settings are the way you want, press the
A
A
A
A
A
button.
•
This exits the setting screen.
•
The display also will exit the setting screen automatically if
you do not perform any operation for about two or three
minutes.
Time Synchronization
If you change the digital time setting, the analog hands will adjust
accordingly.
•
The analog hands will move clockwise until they reach the correct
setting.
•
It may take some time for the analog hands to reach the correct
setting.
Adjusting the Analog Time Setting
You can use the Hand Setting Mode to manually adjust the analog
time when it does not match the digital time.
Mode Indicator
(4 times)
Timekeeping Mode
Hand Setting Mode
1.
In the Hand Setting Mode,
hold down the
A
A
A
A
A
button
for about two seconds.
•
This will cause the second
hand to move to 12 o’clock.
•
“– 00 –” will flash in the digital
display.
6.
While the 12/24-hour
timekeeping setting is
flashing, press the
D
D
D
D
D
button to toggle between
12-hour (“12H”) and 24-
hour (“24H”) timekeeping.
7.
While the seconds are
selected, press the
D
D
D
D
D
button to reset them to 00
in accordance with the
time signal on the radio,
TV, etc.
•
Pressing the
D
button while
the seconds count is in the
range of 30 to 59 resets it to
00 and also adds 1 to the
minutes. Pressing the
D
button in the range of 00 to 29
resets the seconds count
without changing the minutes.
•
Pressing the
B
button while
the seconds count is flashing
changes the face illumination
duration. See “To specify the
illumination duration” for more
information.
8.
While the hour, minutes,
year, month, or day setting
is flashing, use the
D
D
D
D
D
(+)
and
B
B
B
B
B
(–) buttons to
change the setting.
•
Holding down either button
changes the setting at high
speed.
•
When setting the hour, make
sure you specify AM (no
indicator) or PM (P) correctly,
or that you specify the correct
24-hour time.
•
You can set a year in the range of 2000 to 2099. The day of
the week is set automatically in accordance with the date you
set.
•
The watch automatically makes adjustments for leap years
and month lengths.
9.
While the Power Saving
setting is flashing, press
the
D
D
D
D
D
button to toggle it
on (ON) or off (OF).
•
If you turn on Power Saving,
the Power Saving indicator
will be on the display when
you exit the setting screen.
Use the
C
C
C
C
C
button to select each of the settings and the
D
D
D
D
D
button to change them.
Indicates 12-hour or
24-hour timekeeping.
Seconds reset to 00.
(Decrease)
(Increase)
Power Saving Indicator
2.
If the second hand is not
pointed exactly at 12
o’clock, use the
D
D
D
D
D
button
to adjust its position.
•
Each press of the
D
button
moves the second hand one
second clockwise.
•
Holding down the
D
button
moves the second hand at
high speed.
3.
Press the
C
C
C
C
C
button to
change to hour and
minute hand adjustment.
•
This will cause the current
digital hour and minute setting
to flash on the digital display.
4.
Use the
D
D
D
D
D
button to
adjust the hour and
minute hands so they
match the digital time.
•
Each press of the
D
button
moves the hands 20 seconds
clockwise.
•
Holding down the
D
button
moves the hands at high
speed.
High-speed Lock
•
While holding down the
D
button to start high-speed clockwise
movement of the hands, press the
B
button to lock the
high-speed hand movement. You can then release the buttons.
•
High-speed hand movement will continue until it completes a
12-hour cycle, or until you press any button to stop it.
•
High-speed hand movement will also stop momentarily if an alarm
starts to sound. High-speed hand movement will resume after the
alarm stops.
5.
When the setting is the way you want, press the
A
A
A
A
A
button.
•
This will exit the setting screen and automatically
synchronizes the minute hand with the current seconds count.
Next, the second hand will move to the current seconds count
and continue moving from there.
•
The display also will exit the setting screen automatically if
you do not perform any operation for about two or three
minutes.
(Forward)
(Forward)