Operation Guide 3382
7
The stopwatch measures elapsed time in units of 1/100 second up to 59 minutes, 59.99 seconds (60 minutes total). When the maximum
limit is reached, the elapsed time automatically returns to zero and timing continues from there.
❚
To perform elapsed time measurement
In the Stopwatch Mode, press the
D
D
D
D
D
button to start and
stop elapsed time measurement.
(Split/Reset)
(Start/Stop)
❚
Analog Hand Operation in the
Stopwatch Mode
When you enter the Stopwatch Mode, the second hand will move
to 12 o’clock.
Starting an elapsed time measurement operation will cause the
second hand to move along with the seconds count of the
stopwatch operation. After you stop the elapsed time operation,
resetting the stopwatch will cause the second hand to return to 12
o’clock.
Stopwatch Mode
❚
Elapsed Time Measurement
Start
Stop
Reset
Pressing the
B
button while timing is stopped resets the stopwatch to all zeros.
Cumulative Time Measurement
Pressing the
D
button to restart the stopwatch without resetting it to all zeros causes the elapsed time measurement to resume from
where it was last stopped.
❚
Split Time Measurement
Start
Record Split
Clear Split
Stop
Reset
Pressing the
B
button while timing is being performed displays the split time screen, but timing continues internally.
•
Changing to another mode while a split time is displayed clears the split time operation.
❚
1st and 2nd Place Finishers
Start
1st Finish
(Displays time of 1st finisher.)
2nd finish
Displays time of 2nd finisher.
Reset
Pressing the
D
button while the split time screen is on the display stops elapsed time measurement, and leaves the split time screen on
the display. Press the
B
button to exit the split time screen and display the elapsed time when the measurement was stopped.
Spl
it
Split Time Screen
The split time screen first shows the split indicator (SPL), followed by the
split time.
•
If the split time is less than one minute, the split time shows seconds and
1/100 second. If the split time is one minute or greater, the display
alternates at two-second intervals between a screen that shows minutes
and seconds, and a screen that shows 1/100 second.
Minutes Seconds
1/100 Second
Two-
second
intervals
4.
Press the
D
D
D
D
D
button to
cycle the display through
the available summer time
(DST) settings until the
one you want to select is
displayed.
•
AUTO
This setting enables the auto summer time setting, which
turns summer time on or off in accordance with the received
time calibration signal.
•
This setting uses Japan summer time data when TYO is
selected as the Home City, and U.S. summer time data
when NYC, CHI, DEN, or LAX is selected as the Home
City.
•
OFF
This setting turns off summer time and returns to normal
timekeeping.
•
ON
This setting turns on summer time and advances the current
time by one hour.
•
The DST indicator appears on the display when summer
time is turned on.
•
Only OFF or ON can be selected if the current Home City code is
a setting other than HKG, TYO, SEL, NYC, CHI, DEN, LAX, ANC,
or HNL.
5.
When the summer time
setting is the way you
want, use the
C
C
C
C
C
button to
cycle the display through
the settings shown below.
Summer Time
Home City
Code
Power Saving
12/24-hour
Timekeeping
Hour
Minute
Month
Year
Day
Seconds
Home time settings include your Home City (the city where you will
normally use the watch), the current time and date in your Home
City, and other settings.
•
Use the Timekeeping Mode to configure home time settings.
•
Also use the following procedure when you want to turn Power
Saving on or off.
If you are planning to adjust both the digital and analog
settings manually, be sure to adjust the digital setting first.
❚
To configure home time settings
1.
In the Timekeeping Mode,
hold down the
A
A
A
A
A
button
for about two seconds.
•
This will cause your current
Home City code to flash on
the display. Also, the second
hand will move so it points to
the currently selected city
code (time zone name).
2.
Use the
D
D
D
D
D
button
(westward) or the
B
B
B
B
B
button (eastward) to scroll
through the available city
codes.
•
See the “World Time City
Code List” for information
about city codes.
•
Holding down either button
scrolls at high speed, but the
second hand will not move
until you stop scrolling at a
particular city code.
•
The second hand does not move counterclockwise in the
World Time Mode. In some cases, it may take some time
before it reaches the currently selected city code.
3.
When the city code you
want is displayed, press
the
C
C
C
C
C
button.
•
This will display the summer
time (DST) setting screen.
City Code
(Eastward)
(Westward)
TYO = Tokyo
Configuring Home Time Settings
❚
Stopwatch Mode Display Screens
•
Elapsed Time Screen
The display shows counts for the seconds and 1/100 of a second
for the first minute. After that, it shows the minutes and seconds.
1/100 second
Seconds
Seconds
Minutes
•
Paused Elapsed Time Measurement Screen
When elapsed time measurement is paused, the display alternates
between a minute/second screen and a 1/100 second screen at
two-second intervals.
Seconds
Minutes
1/100 Second
Two-second
Intervals