Operation Guide 3286
E-9
To set the time and date
1. In the Timekeeping Mode, hold down
A
until the
seconds start to flash, which indicates the setting
screen.
2. Press
C
to move the flashing in the sequence shown
below to select other settings.
Seconds
DST
Hour
Minutes
Year
12/24-Hour Format
Day
City Code
Month
3. When the setting you want to change is flashing, use
D
and
B
to change it as
described below.
E-8
Timekeeping
Use the Timekeeping Mode to set and view the current
time and date.
Read this before you set the time and date !
The times displayed in the Timekeeping Mode and World
Time Mode are linked. Because of this, make sure you
select a city code for your Home City (the city where you
normally use the watch) before you set the time and date.
•
To view the current Home City code setting, press
A
while in the Timekeeping Mode.
•
For full information on city codes, see the “City Code
Table” at the back of this manual.
Seconds
Hour : Minutes
PM indicator
Day of week
Day
E-7
Stopwatch Mode
Countdown Timer Mode
Alarm Mode
E-6
Timekeeping Mode
World Time Mode
General Guide
•
Press
C
to change from mode to mode.
•
In any mode (except when a setting screen is on the display), press
B
to illuminate
the display.
E-5
To turn the Hourly Time Signal on and off ......................................................... E-23
To illuminate the display ...................................................................................... E-25
To specify the illumination duration ................................................................... E-25
To turn the button operation tone on and off ..................................................... E-26
E-4
Procedure Lookup
The following is a handy reference list of all the operational procedures contained in
this manual.
To set the time and date ......................................................................................... E-9
To toggle the Timekeeping Mode time between DST and Standard Time ....... E-12
To view the time for another city code ............................................................... E-13
To toggle a city code time
between Standard Time and Daylight Saving Time ....................................... E-14
To measure times with the stopwatch ................................................................ E-16
To use the countdown timer ................................................................................ E-17
To set the countdown start time .......................................................................... E-18
To set an alarm time ............................................................................................. E-20
To test the alarm ................................................................................................... E-21
To turn an alarm on and off ................................................................................. E-22
E-3
Contents
General Guide ......................................................................................................... E-6
Timekeeping ............................................................................................................ E-8
World Time ............................................................................................................ E-13
Stopwatch .............................................................................................................. E-15
Countdown Timer ................................................................................................. E-17
Alarms .................................................................................................................... E-19
Illumination ............................................................................................................ E-24
Reference .............................................................................................................. E-26
Specifications ....................................................................................................... E-29
E-2
•
Note that the product illustrations in this manual are intended for reference only, and
so the actual product may appear somewhat different than depicted by an
illustration.
E-1
About This Manual
•
Depending on the model of your watch, display text
appears either as dark figures on a light background or
light figures on a dark background. All sample displays
in this manual are shown using dark figures on a light
background.
•
Button operations are indicated using the letters shown
in the illustration.
•
Each section of this manual provides you with the
information you need to perform operations in each
mode. Further details and technical information can be
found in the “Reference” section.
MA11
0
6-
E
A
