Cashtester BC 141 SD
- 3 -
Rear view
Display and buttons
14.
Count modus
15.
Number of counted notes
16.
ADD ON/OFF
17.
Counterfeit detection ON/OFF
18.
Batch ON/OFF
19.
Speed Low/Middle/High
20.
SORT button
21.
CUR button
22.
BAT button
23.
CLR button
24.
RESET button
25.
FREE button
26.
SPEED button
27.
+1 - +10 button
28.
ADD button
1.3 Start-up procedure
1.
Connect the power cable to the BC 141 SD;
2.
Connect the other end of the power cable to a wall outlet and switch the BC 141 SD on;
3.
The machine automatically starts in ‘SORT mode’;
4.
Place the banknotes flush stacked on two sides in the middle of the feeder and adjust the two
banknote limiters close to the stack of notes for the best counting results. If the banknotes are not
stacked flush or centred, counting errors might occur.
Attention: when the temperature is below 20 degrees Celsius, please wait, after turning on the machine,
a few minutes before starting to count. The machine shall be used at places with good ventilation and
kept away from strong sunshine and/or magnetic field(s)
Please note: to avoid miscounting and damage to the unit the following banknotes should be
separated out before counting:
pasted banknotes
washed banknotes
very dirty banknotes
damaged banknotes
RJ-11 port for printer
USB port/ micro SD card for
software update
ON/OFF switch
RS232 port for external display
Main power connection
Fuse
