CashConcepts Europe GmbH
Kemptener Straße 99 – D-88131 Lindau / Germany
Tel.: +49 (0)8382 – 943 15 – 0 / Fax: +49 (0)8382 – 943 15 – 20
Email: [email protected] / Web: www.cce.gmbh
Update function
Open the battery pocket and insert the MicroSD card into MicroSD card socket, then connect the machine to the external
power supply.
Press and hold the “ON/OFF” key and "CLEAR/MODE" key simultaneously, when the buzzer beeps for 2 times and the green
indicator light is lightened all the time, it means the machine has entered download mode. The display will show in this mode
several “-“ symbols. Then the device will start the software download automatically. After the downloading job is finished, the
machine will beep for 2 times and automatically turn off. Please remove the card and switch on the unit for use.
Please note that it is necessary to use the power supply for the update procedure. You can’t update the
machine in battery mode.
Installation of the optional rechargeable battery
Installation of the optional rechargeable battery
If you have opted for an optional battery to operate the CCE 1800 NEO also
mobile, please proceed as follows to install the battery.
1
Open the battery cover on the bottom of the device.
2
Connect the battery cable to the connector. Due to the shape of the
connector fitting direction is given.
3
Insert the battery as shown in the image in the designated mould and
make sure that the cables are not pinched.
4
Now close the battery compartment and plug the power adapter into
the unit to charge the battery. For the first charge, the device can take
up to 12 hours.
5
In the upper right corner of the display you will see the charge icon of
the battery. Is no bar in the battery icon visible and does the icon flash,
the battery needs to be recharged.
Please note the legal regulations for disposal of batteries. For more
information visit our website www.cce.gmbh
EN