Casella CEL
Page 14 of 27
5. CONFIGURATION
This allows basic settings such as display language and measurement units to be changed,
gives access to Calibration and Duration modes, plus the additional modes available to Tuff
Pro models.
Configuration Mode can be activated only while switching the instrument on.
A. ACCESS CONFIGURATION SCREENS
(Fig. 15)
When powering up, simultaneously press and hold the UP arrow. This allows access to the
configuration screens. After approximately 8 seconds the Set Language screen is displayed.
Figure 15 Access Configuration Screens
B. SET LANGUAGE
(Fig. 16)
Use UP/DOWN keys to select a language. Press ENTER to load the language and continue
setup.
Figure 16 Set Language
C. CONTRAST
(Fig. 17)
Use UP/DOWN keys to adjust the contrast. Press ENTER to save.
Figure 17 Set Contrast
D. TEMPERATURE
(Fig. 18)
Use UP/DOWN keys to select the required unit for displaying the ambient air temperature
(
◦
C or
◦
F) then press ENTER.
Figure 18 Set Temperature
