Casella CEL
Page 11 of 27
G. PROGRAM MODE (PRO ONLY)
(Fig. 10)
Note:
The Advanced Mode must be selected ON to enable this feature.
The program is configured on a PC and then uploaded into the pump.
Refer to chapter 10
for details.
Note:
If the pump is programmed to start sampling at 08:00 on Monday and the pump is not
switched ON until 08:10 on Monday it will not run until the
next
Monday at 08:00.
This example assumes the intention is to run the pump for 4 hours, then pause for 1 hour,
and then resume running for another 4 hours. Use the UP/DOWN keys to step through the
Stop Mode Menu Options (See Fig. 14 for details) until PRG1 screen is displayed.
Press ENTER to continue to the ‘ON 1’ screen. Use the UP/DOWN keys to review the
program set parameters. ON1 is 08:00. OFF1 is 12:00. PAUSE is 12:00 – 13:00. START2 is
13:00. PROGRAM END is 17:00.
When pump is running, to exit Program Mode at any time press and hold ENTER. The MAIN
MENU’s will count own 3, 2, 1 and default to the Main Menu.
Figure 10 Program Mode
H. RESET
(Fig. 11)
(Used to reset all the previous run details from display. If run details are required, please
make a note of these before reseting).
Press and hold ENTER. Release ENTER when counter is at zero.
Note: If the counter is already at zero, the Reset option is not displayed.
Figure 11 Reset Function
