Case L780, Руководство оператора

Страница: 39 / 75

SECTION 2 - OPERATION
2-12
CHECK LIST
When the loader has been installed -- check carefully
that everything works before it is taken into service.
The following points must always be checked. Mark
them off and do the necessary adjustments if
necessary.
1. Check that everything has been installed in
accordance with the installation instructions.
2. Check that a counterweight is fitted, which is
appropriate for the bucket and attachment
application rating.
3. Check that all screws are tightened.
4. Check that the front wheels clear the loader and
base during full wheel lock and oscillation of the
front axle -- if this is not the case, oscillation stops
or limitation of steering lock must be installed.
5. Test operate the loader, make sure that the ends
of the lock pins are visible on the inside of both
the left and right bearing boxes.
6. Check that no oil leakage occurs.
7. Operate all loader functions several times to
remove air from the system.
8. Check the tractor oil level -- top off as necessary.
9. Check that the lock pins engage when a bucket
or attachment is connected.
10. Check that the loader does not have any visible
defects.