Case L780 Скачать руководство пользователя страница 33

Страница: 33 / 75

SECTION 2 - OPERATION

2-6

3rd Hydraulic Function

The third hydraulic function is controlled by a switch

or switches on the front of the control lever, 1.

On tractor with loader control valve, press the loader

third hydraulic function button (A) and move the

hydraulic control lever to the right to open the

grapple, on units equipped with electric diverter valve

system. On Live 3rd units press and hold the top

button to open the grapple. Consult with your dealer

as to the style of system on your tractor/loader.

Loader with Mechanical Self-Leveling

Parallel links keep the base of the attachment in the

same angular position during the entire lift/lowering

movement.

0137-a

0128

INSTALLING THE LOADER

NOTE:

The accessory box markings coincide with

the loader and the base. The decal installed on the

accessory sack for the base contains information

about the number of packages and the part numbers

of the components, in addition to information about

the tractor model. -- Check that these coincide.

Read through the installation instructions which

accompany each kit before making any attempt at

installation.

CAUTION

Pinch risk.
The locking wheel is spring loaded. Handle

carefully.

Install Quick Lock on the left and right bearing boxes.

Install stop (A) on the left and right subframes.

Install the subframe set and connect the loader valve

or hose kit to the tractor’s hydraulics in accordance

with the installation instructions.

0139-a

Содержание L780












































































Результаты поиска

Содержание L780

Отзывы:

Похожие инструкции для L780

Бренды по названию

Популярные бренды

Case L780, Руководство оператора

Результаты поиска

Содержание L780

Отзывы:

Похожие инструкции для L780

Бренды по названию

Популярные бренды