manualshive.com logo in svg

Case 621F, Руководство по обслуживанию

Поделиться
Скачать
Case 621F Скачать руководство пользователя страница 18

1002-3

CAPACITIES AND LUBRICANTS

Engine Oil

Capacity with Filter Change ....................................................................................... 13.25 liters (14 U.S. quarts)
Total system capacity...................................................................................................  15.1 liters (16 U.S. quarts)
Type of oil...................................... Case AKCELA No. 1 engine oil - see engine oil recommendations on page 4

Engine Cooling System

Capacity........................................................................................................................28.4 liters (30 U.S. quarts)
Type of Coolant ............................................................................................50% water and 50% Ethylene Glycol 

Fuel Tank

Capacity ................................................................................................................... 246 liters (65.0 U.S. Gallons)
Type of Fuel ............................................................................................ See Diesel fuel specifications on page 5

Hydraulic System

Hydraulic Reservoir Refill Capacity .............................................................................90.8 liters (24 U.S. Gallons)
Total System Capacity ..............................................................................................147.6 liters (39 U.S. Gallons)
Type of Oil ............................................................................................................. Case AKCELA Hy-Tran

 

Ultra

®

Transmission

Refill Capacity with Filter Change ..............................................................................26.7 litres (28.2 U.S. quarts)
Type of Oil ....................................................................................................................................... Case Nexplore

Axles

Capacity

Standard Front ......................................................................................................... 22 litres (23.2 U.S. Quarts)

Standard Rear.......................................................................................................... 22 litres (23.2 U.S. Quarts)

Optional Front .......................................................................................................... 22 litres (23.2 U.S. Quarts)

Optional Rear........................................................................................................... 22 litres (23.2 U.S. Quarts)

Type of Lubricant ............................................................................................................................ Case Nexplore

DEF (Diesel Exhaust Fluid)

Total Capacity  ...............................................................................................................60 litres (16 U.S. Gallons)

NOTE: 

DO NOT use an alternate oil in the axles. The brake components in the axles could be damaged as a result

of using an alternate oil. Machines are shipped from the factory with break-in oil.

Brake System
Type of Fluid (Same as Hydraulic System) .............................................................. Case AKCELA Hy-Tran

 

Ultra

®

Содержание 621F




















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды