Case IH STX275, Руководство по обслуживанию

Страница: 12 / 51

1001-2
Rac 7-90470 Printed in U.S.A.
Template Name: SM_2_col
Template Date: 1997_01_13 Alt= to hide template information
Alt+ to display template information
SAFETY
WARNING: THIS SAFETY ALERT SYMBOL INDICATES IMPORTANT
SAFETY MESSAGES IN THIS MANUAL. WHEN YOU SEE THIS
SYMBOL, CAREFULLY READ THE MESSAGE THAT FOLLOWS AND
BE ALERT TO THE POSSIBILITY OF PERSONAL INJURY OR
DEATH.**
M171B
!
To prevent injury always follow the Warning, Caution
and Danger notes in this section and throughout the
manual.
Put the “Do Not Operate” tag shown below on the key
for the key switch when keys are removed for
servicing or repairing the machine. Tags are available
from your service parts supplier.
Before servicing a machine, park the machine on
hard level ground. Turn off the engine, apply the
parking brake and remove the key from the key
switch. Put blocks in front of and behind either the
front or rear wheels.
MS99B001
WARNING: Read the operators manual to
familiarize yourself with the correct control
functions.
M489
WARNING: Operate the machine an d
equipment controls from the seat position
only. Any other method could result in
serious injury.
M490
WARNING: This is one man machine, no
riders allowed.
M491
!
!
!
WARNING: Before starting engine study
Operators Manual safety messages. Read
all safety signs on machine. Clear the area of
other persons. Learn and practice safe use
of controls before operating. It is your
responsibility to understand and follow
manufacturers instructions on machine
operation, service, and to observe pertinent
laws and regulations. Operator and Service
M a n u a l s m a y b e o b t a i n e d f r o m y o u r
equipment dealer.
M103A
WARNING: If you wear clothing that is too
loose or do not use the correct safety
equipment for your job, you can be injured.
Always wear clothing that will not catch on
objects. Extra safety equipment that can be
required includes hard hat, safety shoes, ear
protection, eye or face protection, heavy
gloves and reflector clothing.
M492
WARNING: When working in the area of the
fan belt with the engine running, avoid loose
clothing if possible, and use extreme caution.
M493
WARNING: When doing checks and tests
on the equipment hydraulics, follow the
procedures as they are written. DO NOT
change the procedure.
M494
WARNING: When putting the hydraulic
cylinders on this machine through the
necessary cycles to check operation or to
remove air from a circuit, make sure all
people are out of the way.
M495
WARNING: Always wear heat protective
gloves to prevent burning your hands when
handling heated parts.
SM121A
!
!
!
!
!
!