INTRODUCTION
Operator protective structure
Your tractor is equipped with an operator protective structure, such as: a Roll Over Protective Structure (ROPS),
Falling Object Protective Structure (FOPS), or a cab with ROPS. A ROPS may be a can frame or a two-posted or
four-posted structure used for the protection of the operator to minimize the possibility of serious injury. The mounting
structure and fasteners forming the mounting connection with the tractor are part of the ROPS.
The protective structure is a special safety component of your tractor.
DO NOT attach any device to the protective structure for pulling purposes. DO NOT drill holes to the protective
structure.
The protective structure and interconnecting components are a certified system. Any damage, fire, corrosion, or
modification will weaken the structure and reduce your protection. If this occurs, THE PROTECTIVE STRUCTURE
MUST BE REPLACED so that it will provide the same protection as a new protective structure. Contact your dealer
for protective structure inspection and replacement.
After an accident, fire, tip or roll over, the following MUST be performed by a qualified technician before returning
the tractor to field or job-site operations:
• The protective structure MUST BE REPLACED.
• The mounting or suspension for the protective structure, operator seat and suspension, seat belts and mounting
components, and wiring within the operator’s protective system MUST be carefully inspected for damage.
• All damaged parts MUST BE REPLACED.
DO NOT WELD, DRILL HOLES, ATTEMPT TO STRAIGHTEN, OR REPAIR THE PROTECTIVE STRUCTURE. MOD-
IFICATION IN ANY WAY CAN REDUCE THE STRUCTURAL INTEGRITY OF THE STRUCTURE, WHICH COULD
CAUSE DEATH OR SERIOUS INJURY IN THE EVENT OF FIRE, TIP, ROLL OVER, COLLISION, OR ACCIDENT.
Seat belts are part of your protective system and must be worn at all times. The operator must be held to the seat
inside the frame in order for the protective system to work.
48144025 23/06/2017
16
