Case IH FARMALL 100N, Руководство по обслуживанию

Страница: 48 / 51

Engine - Engine and crankcase
Engine - Remove
Farmall® 100N Without cab [ZGLL04308 - ]
Farmall® 100V Without cab
Farmall® 110N Without cab [ZGLL03317 - ]
Farmall® 110V Without cab [ZGLL03058 - ]
Farmall® 80N Without cab [ZGLL03560 - ]
Farmall® 80V Without cab [ZGLL03079 - ]
Farmall® 90N Without cab
Farmall® 90V Without cab
Prior operation:
A. Remove the engine from the drive line - See Engine - Remove from transmission (10.001) .
B. Remove the right and left anti roll-over chassis protection supports (ROPS) – See Roll Over Protective Struc-
ture (ROPS) support - Remove - Left-hand side (90.114) and Roll Over Protective Structure (ROPS) support -
Remove - Right-hand side (90.114) .
1. Carefully clean the area of the connectors (1) of the
engine injection system, the steering sensor and the
pre-heating system on the right side of the vehicle.
2. Disconnect the three connectors (1) on the right side of
the engine.
MOIL16TR01600AA
1
3. Unscrew the screw (1) securing the support bracket of
the power steering intermediate pipe (2) .
MOIL16TR01603AA
2
4. Carefully clean the area of the fuel pressure sensor
connector (1) .
5. Disconnect the fuel pressure sensor connector (1) .
MOIL16TR01601AA
3
51430129 15/12/2017
10.1 [10.001] / 3