Case IH FARMALL 100N, Руководство по обслуживанию

Страница: 40 / 51

INTRODUCTION
Plates - Product identification
The series numbers identify the tractor and main parts. The identification data must be supplied by the dealer for
requests for spare parts or service operations. Identification data is of fundamental importance in the event of theft of
the tractor. The location of the various identification data is shown below.
A. Frame identification data plate
The tractor’s product identification number (PIN) is
stamped over the front support. It gives the safety
frame identification data
B. Roll Over Protective Structure (ROPS) identification
data plate
The plate gives the identification data for the rops
frame fitted on the machine.
C. Frame and engine type identification summary data
plate
It links the identification number with the product iden-
tification number (PIN) and the machine's engine.
D. Front axle identification plate
The plate is located on the component and gives the
identification data for the axle fitted on the machine.
E. Engine identification data plate
The plate with the engine data installed on the tractor
is fitted on the right or left hand side of the engine
(depending on the model).
MOIL16TR03032CB
1
51430129 15/12/2017
31