Engine - Engine and crankcase
21. Disconnect the hoist chains. Remove the jack stand
(2)
previously fitted under the clutch case
(1)
. Retrieve
the movable tool for dismantling tractors.
WLAPL4S10C129A
12
22. Refit the bracket
(2)
supporting the cab connectors,
cab power and cup filter
(3)
. Connect the pipe that
joins the latter to the mechanical priming pump on the
sediment filter.
23. On the left-hand side, connect the cab power cable
connector
(1)
. Put the connector on the maxi fuse box
and lock with clamps.
WLAPL4S10C139A
13
24. Return the main engine cable
(3)
to its original posi-
tion. Connect the sensors and connect the switches
located on the engine. Connect the connectors
(4)
on
the controller
(5)
. Connect the connectors on the maxi
fuse compartment. Secure the wiring with clamps.
25. Lay out the FTP interface - engine cable
(1)
on the
machine. Reconnect the various connections
(2)
. Se-
cure the wiring with clamps.
MOIL14TR00614AA
14
26. Refit the starter motor
(2)
. Then connect the ground
cable of the engine and battery system. Secure the
ground cable with the bolt
(3)
.
27. On the right-hand side, reconnect the battery positive
cable and the wirings to the starter motor, battery cut-
off switch and alternator. Refit the shroud
(1)
on the
starter motor
(2)
.
WLAPL4S10C135A
15
47878246 08/06/2015
10.1 [10.001] / 25
