Engine - Engine and crankcase
5. Then detach the lower pipe
(3)
on the condenser
(1)
.
Free the pipe from any straps or clamps. Disconnect
the sensor
(2)
. Place the pipe on the cab.
WLAPL4S10C107A
3
6. Raise the rear of the tractor with a hydraulic jack. Place
a mechanical jack stand under the reduction gear case.
Use a pneumatic gun to remove the retaining nuts of
the left-hand rear wheel. Then remove the wheel.
WLAPL4S10C110A
4
7. Unscrew the front, central, and rear retaining bolts on
the guard of the front axle control shaft. Then remove
the guard
(1)
.
WLAPL4S10C112AA
5
8. Remove the circlip
(2)
and move the front sleeve
(1)
in
the direction indicated by the arrow until it is released
from the groove on the front axle.
WLAPL4S10C113AA
6
47878246 08/06/2015
10.1 [10.001] / 13
