22
3-4. DEVICE
Set the values for recording video. Navigate through menu items by pressing the UP/DOWN
buttons. User can change the value of the menu item by pressing the LEFT/RIGHT buttons.
Menu items in DEVICE mode setup
ALARM-OUT:
Set the alarm generation for the motion detection, sensor input and video loss and
set the alarm time duration.
PTZ:
Set the camera control data speed, number, type and ID.
SPOT-OUT:
Set the spot type, spot event time, sequence, sequence dwell time and channels.
KEY TONE:
Enable/Disable button beep sound.
REMOTE CONTROLLER ID:
Select an ID of remote controller. Please take steps as followings.
STEP 1) Select an ID from 1 to 9.
STEP 2) Press the same number as ID set in DVR on a remote controller.
STEP 3) Then
icon will be displayed on Live screen of DVR that respond to the remote
controller.
SENSOR:
Select the sensor number for applying the following settings.
TYPE:
Set the type of sensor for the specified channel from none, N/O (normal open), and N/C
(normal closed)
Figure 3.4.1 DEVICE mode setup screen
