8
6921320-R3
1
2
3
Instructions for Replacement of Sleeve
2a
3a
Position the REACHFORKS® at hip height, tilt the
mast of the forklift slightly forward and remove
the key from the ignition switch of the forklift.
Warning:
Do not carry out maintenance work on the
REACHFORKS® while there is pressure
in the hydraulic system (remove key from forklift
ignition switch).
Applies to some REACHFORKS® models/:
Unscrew the screws (3) and remove the stops (4) from the
outer sleeve (5) (on both sides of the sleeve).
Tools required:
Allen key 4.
Pull the sleeve (1) off the fork.
Tap the spring pins (2) out of the sleeve (1).
Tools required
: Hammer, punch Ø10
Applies to some REACHFORKS® models:
Unscrew the screws (6) (on both sides) from the stops (7)
and remove the inner sleeve.
Tools required:
Allen key 4.
