2
-
To make good use of your appliance, please read these instructions carefully and
look at the illustrations before using it.
-
Check that the voltage on the product rating plate coincides with your mains voltage.
-
The iron shall not be used if there are visible signs of damage or if the iron is
leaking. The iron shall be sent to the manufacturer or its qualified service agent
before further use.
-
Completely unwind the mains cable.
-
Always unplug the iron when not in use, even if only for a short period of time.
-
Unplug it from the mains and leave it standing on its rear base.
-
Make sure that children can not touch the hot iron and that they can not pull on the
mains wire.
-
Always unplug the iron before filling the water or when removing the excess water
from it.
-
Never submerge the iron in water.
-
THe iron must not be left unattended while it is connected to the supply mains.
-
The iron shall be used on a stable ironing board.
-
The iron must be used and rested on a stable surface.
-
When placing the iron on its stand, ensure that the surface on which the stand is
placed is stable.
-
To avoid overloads, do not plug any other high-power appliance into the same
electricity line.
-
The filling aperture must not be opened during use.
-
The iron is not to be used if it has been dropped, if there are visible signs of
damage or if it is leaking.
-
If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or similar qualified persons in order to avoid a hazard.
Safety Precautions
1. Certain parts of the iron have been lightly greased therefore the iron could give off
a little smoke when plugged in for the first time. This will cease after a short while.
2. Before using the iron for the first time, remove the plastic protector from the base
(if it has one) clean the base with a soft cloth.
3. Keep the base very smooth. Do not run it over metal objects (such as against the
ironing board, buttons, zips ,etc.)
4. Pure wool fibres (100% wool) can be ironed with the appliance in the steam
position. By preference, select a high steam position and use a dry ironing cloth.
Before using the iron
