Cascade Sciences CVO-2-HT, Инструкция по установке и эксплуатации

Страница: 23 / 72

23 | P a g e
cascadesciences.com | Tel. 503 847-9047
INSTALLATION
I
NSTALLATION
P
ROCEDURE
C
HECKLIST
For installing the oven in a new workspace location.
Pre-Installation

Verify that a vacuum supply source suitable for your application is available
and can be connected to the oven, page 14.
•
See page 30 for the oven gas and vacuum port locations.

Check that the required ambient conditions for the unit are met, page 24.

Check that the spacing clearance requirements are met, page 24.
•
Unit dimensions may be found on page 9.

Check that a suitable electrical outlet and power supply is present, page 25.
Install the Oven in a suitable workspace location

Review the lifting and handling instructions, page 26.

Install the oven in its workspace location, page 27.

Make sure the oven is level, page 27.
Set up the Oven for use

Clean the oven shelving. Clean the chamber if needed, page 27.

Install the shelving in the oven chamber, page 28.

Connect the oven to its vacuum supply source along with any optional backfill gas
supply, page 30.