Non-Sideshifting
A
Mast Single Internal Reeving
OR
C
LH THINLINE
姠
2-Port Hose Reel Group
Sideshifting
A
Mast Double Internal Reeving
OR
A and C
Mast Single Internal Reeving and
LH THINLINE
姠
2-Port Hose Reel
Group
OR
B and C
RH and LH THINLINE
姠
2-Port Hose
Reel Groups
Solenoid Adaption
A and B
Mast Single Internal Reeving and
RH Cable Reel Group
OR
B
RH 6-N-1 Cable/Hose Reel Group
ONTENTS
C
ECOMMENDED HYDRAULIC SUPPLY OPTIONS
R
Recommended Hydraulic Supply
i
Truck Requirements
1
Installation
2
Periodic Maintenance
8
i
6039153 Rev. 0
C
B
The 55H Fork Positioner requires one of the hydraulic
supply arrangements shown below. Refer to Cascade
Hose & Cable Reel Selection Guide, Part No. 212199, to
select the correct hose reel for the mast and truck. Hose
and fitting requirements are as follows:
• All hoses and fittings for fork-positioning and sideshift-
ing (if equipped) functions should be at least No. 4
with 3/16 in. (5 mm) minimum I.D.
This Manual provides instructions for installing the
Cascade 55H Sideshifting Fork Positioner.
Follow the suggested installation procedures for best
results. If you have any questions or need more informa-
tion, contact your nearest Cascade Service Department
(see back cover).
Read the
WARNING
Statements placed throughout this
Manual to emphasize safety during Fork Positioner
installation.
IMPORTANT:
Field alterations may impair performance
or capability and could result in loss of warranty. Consult
Cascade for any required modifications.
GA0033.ill
A
