Casals VD2000M, Оригинальное руководство пользователя, Страница: 5 / 46

5
- Make sure that all the product’s packaging has been
removed.
- Ensure that the voltage indicated on the rating label
matches the mains voltage before plugging in the
appliance.
Use:
- Unroll the cable completely before plugging it in.
- Connect the appliance to the mains.
- To save energy only switch the power tool on when
using it.
Switching on:
- Press the On/Off Switch (4) to position I or II.
Switching off:
- Press the On/Off Switch (4) to position 0.
Setting the air flow and temperature:
With the On/Off Switch you can selector between
different temperatures and air flows combinations:
Setting ºC l/min
Position I 400 300
Position II 600 500
Removing the heat protection:
- The heat protection collar (2) can be removed when
working at hard-to-reach locations.
- CAUTION: Increased danger of burning exists when
working without the heat protection collar
- Unplug the appliance from the mains.
- Allow the hot air gun to cool down.
- Turn the heat protection collar (2) anticlockwise to
remove and in clockwise direction to mount again.
Placing Down the power tool (Fig C):
- To cool down the power tool place it down on the
standing surface (3)
Working Advice
- The ideal temperature must be obtained by
performing a test
- The distance between the nozzle and the workpiece is
dependant of the material to be processed.
Remove paint/dissolving adhesives
- Soften the paint using the hot air gun and remove
evenly with the scraper.
- Do not heat for too long since this will burn the paint.
Removing paints from windows
- Always use the glass protection nozzle (5).
- Do not use the appliance if its accessories are not
properly fitted.
- Do not use the appliance if the on/off switch does not
work.
- Use the appliance handle/s, to catch it or move it.
- If you use the appliance in a bathroom or similar place,
unplug the appliance from the mains when it is not in
use, even if it is only for a short while, as proximity to wa-
ter involves a risk, even if the appliance is disconnected.
- Unplug the appliance from the mains before replacing
any accessory.
- Unplug the appliance from the mains when not in use
and before undertaking any cleaning task.
- This appliance is for household use.
- This appliance should be stored out of reach of children
and/or the disabled.
- Do not store or transport the appliance if it is still hot.
- Use the appliance and its accessories and tools in ac-
cordance with these instructions, taking into account the
working conditions and the work to be performed. Use
the appliance for operations different from those intend-
ed could result in a hazardous situation.
- Is recommended use safety gloves
- Never leave the appliance unattended while in use.
- Do not use the appliance on any part of the body of a
person or animal.
- Do not use the appliance with pets or animals.
- Do not use the appliance to dry textiles of any kind.
Service
-Have your power tool serviced by a qualified repair
person using only identical replacement parts.
This
will ensure that the safety of the power tool is maintained
-Any misuse or failure to follow the instructions for use
renders the guarantee and the manufacturer’s liability
null and void.
Description (fig. A, B, C)
1 Nozzle
2 Heat protection collar
3 Standing surface
4 On/Off Switch
5 Glass protection Nozzle
6- Reflector Nozzle
7- Scrapper Nozzle
8- Reducer Nozzle
Instructions for use
Before use:
- Unplug the appliance from the mains.
- Soften the paint using the hot air gun and remove
evenly with the scraper and a wire brush.
Shaping plastic tubing
- Use the reflector Nozzle
- To avoid kinking of the tubing, fill the tubing with sand
and seal at both ends.
- Heat the tubing evenly by moving it from side to side.
- Fit the cone
Staining wood
- Use the cone nozzle.
- Do not hold the nozzle too close to the wood as this will
color the wood unevenly.
- Sand off any singed wood fibres afterwards using fine
emery paper.
Shrink fitting
- Use the cone nozzle.
- Selector a proper heat-shrinkable sleeve.
- Heat the heat-shrinkable sleeve evenly.
Defrosting water pipes
- Do not attempt to defrost PVC piping.
- Use the reflector Nozzle
- Heat the frozen area inwards from the edge to the center.
Once you have finished using the appliance:
- Press the On/Off Switch (4) to position 0.
- Disconnect the appliance from the mains.
Safety thermal protector:
- The appliance has a safety device, which protects the
appliance from overheating.
Cleaning
- Disconnect the appliance from the mains and allow it to
cool before undertaking any cleaning task.
- Clean the electrical equipment and the mains connection
with a damp cloth and dry. DO NOT IMMERSE IN WATER
OR ANY OTHER LIQUID.
- Clean the equipment with a damp cloth with a few drops
of washing-up liquid and then dry.
- Do not use solvents, or products with an acid or base
pH such as bleach, or abrasive products, for cleaning the
appliance.
- Do not let water or any other liquid get into the air vents to
avoid damage to the inner parts of the appliance.
- Never submerge the appliance in water or any other
liquid or place it under running water.
- If the appliance is not in good condition of cleanliness, its
surface may degrade and inexorably affect the duration of
the appliance’s useful life and could become unsafe to use.