Casall INFINITY 1.3B, Руководство пользователя

Страница: 17 / 19

‐
Press joggle wheel to select H.R.C. and enter by pressing it. Choose HRC55 ‐‐ >HRC75 ‐‐ >HRC90 ‐‐ >TARGET.
With HRC55,HRC75,HRC90, the max. Heart rate will be calculated by the computer automatically.
‐ With the TARGET program, the preset value 100 will be shown. Rotate joggle wheel to set a value
between 30~230 and confirm. The program has been saved.
‐ Set the desired session time with joggle wheel and press STATR/STOP to start workout.
For this program, it is necessary to keep your hands on the sensor grips or wear chest strap while
exercising so that computer can detect and display your heart rate value.
Program sequence:
The computer sets a pedal resistance that keeps you exercising constantly within your target pulse rate.
.If you are exercising and go below your preset pulse rate, the pedal resistance will automatically rise by
one stress level every 30 seconds.
.If you are exercising and go above your preset pulse rate, the pedal resistance will automatically
decrease by one stress level every 15 seconds. If you have already reached the lowest level “1” and your
pulse rate is still higher than your preset value, then after about 30 seconds an acoustic signal will alarm
and computer program will end automatically.
Exercising with set output values
Here you can enter a constant output value. The computer automatically adjusts the pedal resistance to
your speed so that your output remains constant.
‐ Press joggle wheel to select WATT and enter by pressing it. Rotate joggle wheel to set desired session
output value (default value: 120).
‐ Set the desired session time with joggle wheel press STATR/STOP to start workout.
‐ You can adjust WATT level while exercising by rotating joggle wheel up or down. The newly set value will
be shown under the WATT window. Without KEY entry for 3 seconds, the Load level value will change to
WATT value.
User ‐ defined profile
Here you can design your own profile with bars just like the preset program profiles.
‐ Press joggle wheel to select USER PROGRAM and enter by pressing it. The first bar will be displayed.
‐ Rotate joggle wheel to set resistance level and confirm by pressing it. The next bar will be displayed.
‐ Continue this process till set up 8 bars. The max. Resistance level is 16. Once finishing your desired
profile, press and hold joggle wheel for 2 seconds, the profile has been saved.