9
Steps 4
1. Fit
pedal
holder (G-1) to the slippery rail (J-1) and secure it
with 2
carriage screws (L-3) and 2 flat
washers (L-2) , and two nuts (L-4). Make sure they are securely tightened.
Remarks: Do not screw one set of the Screws and Nuts too firm at one time. It is better to fix the
two sets firmly at the same time because it helps you to change angles and to fix easily.
Steps 5
1. Attach the rear stabilizer (I) to the slippery rail (J-1) and secure it with 2 allen bolt (L-1), 2 flat
washers (L-2). Make sure they are securely tightened.
