Installation of receiver unit in Vortice ceiling fans of the NORDIK series
Receiver
Canopy
Downrod
Lower
Canopy
Once the receiving unit has been
electrically connected, it is placed
in the upper canopy kit of the Vor-
tice ceiling fans of the NORDIK se-
ries. Please put the antenna cable
in the canopy. Next, you must fasten
the canopy to the ceiling. Your fan
and remote control are now ready for
operation.
Coding of the FB-FNK Advanced
The remote control receiver (diagram 4) and transmitter unit (diagram 5) must have the same
code. Put the switch in the desired position you selected (factory default is up for all swit-
ches). Please use a small screwdriver or a ballpoint to do this.
diagram 4
diagram 5
14
Battery Typ: 9V / 6F22
Code
DIP 1-4
Battery
Code
DIP 1-4
GB
Light
DIP 5
DIP 5: If DIP 5 set to OFF (delivery condition) the dimming function for the light kit is
activated. For using an enegry saving lamp (ESL) set DIP 5 to ON. This deactivates the
dimming function (Licht only ON/OFF).
1 2 3 4 5
