Help with faults
Fault
Cause
Remedy
Blade does not turn.
Speed setting to „0“.
Switch on unit.
Mains plug not correctly
inserted.
Insert mains plug.
Household fuse blown/
trip defective.
Check household fuse/trip.
Fuse has blown due to
overload (motor overhe-
ating).
Remove unit from mains supply. Pull
plug from the socket and have the unit
repaired by a specialist or customer
service.
If the fault can not be remedied using the above listed remedies, then the plug has to be
removed from the socket.
A specialist must now establish the cause and carry out the repair work accordingly.
If the mains cable to this unit is damaged, then it can only be repaired by a repair workshop
named by the manufacturer, due a special tool being needed.
Note:
Opening the unit and repairs may only be carried out by a specialist!
GB
9
Clock setup
For setting the clock which is shown at the display of the fan, please use following buttons
while fan is in off position but power cord is connected:
- To set the hour, press button at the unit or at the remote control.
- To set the minutes press button at the unit or at the remote control.
- In the event of damage and/or faulty operation or abnormally loud noises, switch off the de-
vice and do not tamper with it.
- If, in such as event, a repair is necessary, contact an authorised by the manufacturer customer
service point.
- Clean the surface of the housing and the guard with a dry cleaning cloth and a damp brush
(page 20).
- Clean only the exterior surfaces. Do not dismantle the device to clean it.
- Do not use petrol or any similar light fl ammable cleaning material.
Storage
- If the fan is not to be used for some time, then store it in a dry room.
- In addition, you could put a cover on your unit to protect it from dust or dirt deposits.
Disposal
- Remove mains plug.
- Cut through the mains cable at the plug.
- Dispose of the unit in a proper manner.
CasaFan GmbH, Senefelderstr. 8, D 63594 Hasselroth
