20
21
SPECIALS
Specials
The Quattromed IV-S is fitted with overheating protection for your safety. The engines start
to warm up under heavy load and high contact pressure. Before this becomes a source of
danger, and in order to preserve the service life of the massage device, it switches itself off
independently in the even of excessive temperatures and cannot be switched on until it has
cooled down.
You should also treat your body to breaks. We recommend that you do not exceed a continuous massage
duration of 30 minutes in order not to stress your muscles too much.
Attractive design combined with durable components, such as the durable synthetic leather, the ergonomi-
cally adjusted back hard shells with carbon look speak for a reliably safe massage experience.
Specials
The Quattromed IV-S has 3 automatic programmes each for the entire, upper and lower back area as well
as numerous manually adjustable massage functions. The burden of your body weight intensifies the massage
effect. Please make sure that you centre the entire body so that the massage heads run parallel to the spine.
Before you begin with the desired massage please select the intended massage time of 5/10/15 minutes. You
can prolong or reduce this during the massage at any time. Please beware that the processes of the automatic
programmes varies depending on the massage time.
The deep warmth of the massage heads is activated via the „Heating“ button and can be switched on or off
during automatic and manual use as desired. Please note that it can take up to 5 minutes for the massage
heads to warm up completely.
The vibration can be switched on or off as desired during the chosen massage using the „Vibration“ button.
For your personal well-being you can change the direction of the massage heads by pressing the button
„Reverse“.
After the selected massage time or the automatic programme ends, the Quattromed IV-S independently
reverts to stand-by mode. Disconnect the device from the mains in order to switch off the device completely.
We advise this after each use.
SPECIALS / TROUBLESHOOTING
Troubleshooting
REMEDIAL ACTION
•
Check whether all connections are correctly
paired. Ensure that the power supply is fully
connected.
•
The device can overheat if used permanently.
Therefore, turn it off, disconnect it from the
mains power supply and let it cool down com-
pletely.
•
Check whether the connectors are correctly
paired for the vibration and power supply unit.
FAULT
•
The device is connected to the mains, however
neither the device nor the remote control op-
eration work.
•
The device is connected to the mains. The vibra-
tion in the seat is running and cannot be switched
off. Remote control and massage do not work.
•
The device is connected to the mains. Vibration
massage does not work.
ROLLING
Pleasant alternation between relaxation and releasing the muscles – also perfectly suited for a final
massage, for relaxation and recovery of the muscles.
KNEADING
Skin and muscles are either clasped and kneaded between the thumb and the index finger or with
both hands. This massage technique is used in particular to ease tension.
VIBRATION
The Vibration setting moves parts of the body with equal vibrations, which penetrate deeply into
the muscles. This stimulates the circulation in the muscles.
REVERSE
The reverse function changes the direction of the massage heads.
JADE HEATING
Jade is a natural store and conductor of heat. These high-quality jade stones, purposefully integrated
in the massage heads dispense deep warmth and a relaxing effect.
S-LINE
With this automatic programme the massage heads are working very close to your body, they mas-
sage the whole back down to your buttocks. The S-shaped mechanic is constructed after the natural
anatomy of the spine.
AUTOMATIC
3 specifically developed automatic programmes for the whole body, which offer a big range of
different massage techniques. Additionally you can also turn on the heating function, if you‘d like.
SPOT
The massage heads can massage a particular.
