Casada Braintronics AURA, Быстрая инструкция по сборке/установке

Страница: 14 / 58

27 26
3.2| Use four screws to fix the side panel.
3.3| To reattach the side panel, tap by hand against the edges of the side panel cover.
4.1| The seat cushion is fastened with a zipper on right and left side.
4.2| Fasten the seat cushion to the backrest using the velcro strap.
Set-up & Assembly
SE
T-
U
P &
A
SSE
M
BL
Y
4|
SEAT CUSHION ATTACHMENT
Fasten the zipper between seat and the footrest.
Zip Velcro strap
Cleaning | Maintenance | Storage
C
LEA
NI
N
G | M
A
IN
TE
N
A
N
C
E | S
TO
RA
G
E
A|
CLEANING OF THE SYNTHETIC LEATHER
Wipe the synthetic leather with a soft dry cloth. Do not clean the product with solutions contai-
ning chemicals such as thinners, gasonline and alcohol.Be sure that leather cleaner will not harm
the synthetic leather by reading the label. If the synthetic leather Is very dirty, wipe it with the
method below.
1. Wet a soft cloth into hot water or a standard neutral detergent and wring it out.
2. Be sure the soft cloth is well wrung out till there is NO water dripping from the cloth.
3. Wipe surface of the synthetic leather with the soft cloth.
4. Be sure to rinse out the cloth multiple times when wiping down.
5. Have the synthetic leather dry naturally. Do not use dryer.
•
Surface of the synthetic leather may fade or discolor if an unappropriate detergent is used. Test
the cleaning solution in small section prior to fully applying.
•
Cleaning synthetic leather with any alcohol, thinner or benzine based agents, may cause
discoloring or the total removal of t color.
B|
CLEANING OF THE PLASTIC PARTS
1. Put a piece of soft cloth into hot water mixed with a neutral detergent, wring it out and wipe
the plastic parts.
2. Do not clean the plastic parts with chemicals such as thinners. gasoline and alcohol.
3. Wipe down with a mircofiber or soft cloth wrung out in clean water.
4. Have the plastic parts dry naturally.
C|
STORAGE
• If the device is not used for a longer period of time, the power cable should be wound up and the
device should be stored in a dry environment.
• Never store the device at high temperatures or in proximity to open fire. Avoid prolonged exposu-
re to sunlight.
• Please only use commercially-available artificial leather care products for cleaning. Do not clean
it with thinner, benzene, or alcohol at any time.
• If the device is on an uneven surface, do not roll or push it; lift it up in order to move it.
• Please take breaks after each use and do not use the device a number of items without pauses.