Casablanca Fan Co. - Factory Service Department - Technical Library
5
File Name (TBW500ConvertW505.pmd) RAS 05-18-2007
Convert W500 to W505 -
Continued
(Figure #11)
Step #7:
Locate the two (2) hold down tabs on the receiver as shown in (figure #11) and with a small screw driver carefully push
out on the hold down tab pulling down on the receiver unfastening it from one side of the receiver. Repeat this for the other hold
down tab removing the receiver from the mounting plate as shown in (figure #12).
Once you have removed the old receiver, reverse step #6 and reinstall the new W-505 receiver and continue with the
steps below to complete your installation.
(Figure #12)
INSTALLING THE W505 RECEIVER
Step #1:
Locate the 2 rectangular slots and 1 oblong hole on
the rim of the canopy. Carefully lift up the fan and canopy and
hang the canopy on the 2 hooks on the ceiling plate through
the rectangular slots as shown in (figure #1).
(Figure #1)
(Figure #2)
Step #2:
You should have 3 groups of wires, HOUSE WIRES,
RECEIVER WIRES AND WIRES FROM THE FAN. Pull the
long wires from the fan out of the canopy and pull them to
one side as shown in (figure #2).
W-505
™