15
Heritage
II
TM
Step 12d.
Plug the male Molex plug into the female
Molex plug, aligning color and letters.
NOTE:
The Molex plug will only connect if the letters
and colors are matched on both plugs. Do not force
the plug together.
Figure #4
Figure #1
MOLEX
PLUG
LIGHT FIXTURE INSTALLATION (OPTIONAL)
Step 13a.
Remove the plug from the switch
housing. Figure #1.
Step 13b.
Remove the Cut wire sleeves for the
included light switch and unscrew the knurl nut.
Figure #2.
Step 13.
If you have purchased a Heritage™ II compatible light fixture for your fan (KGC10W, KGC12W, or
KGC19W), you will need to prep your fan for this installation. Continue using these instructions until otherwise
noted. If you are not installing a light kit, skip to step 14.
Figure #2
CUT WIRE
SLEEVES
KNURL NUT
