5
A
LESSANDRIA
®
LAG SCREW INSTALLATION
CANOPY INSTALLATION
NOTE:
This step is required only under two conditions:
If the fan weighs 36 lbs. or more or if the existing ceiling
fi xture outlet box needs to be modifi ed for a ceiling
fan application (for example, if the house is not new
construction and you are replacing an existing light
fi xture). We recommend that the ceiling box be of
suffi cient capacity to support the weight of the fan and
light fi xture under any conditions. If in doubt whether
you need to install the lag screw, consult a qualifi ed
electrician.
Step 2.
With the large washer attached, pass the lag
screw through the center hole of the crossbar mounting
bracket and screw into the guide hole. Tighten until
the outlet box is mounted fi rmly to the beam. This box
must be secured to the ceiling fi rmly.
S
tep 3.
Attach the canopy to the crossbar mounting
bracket with three of the 8-32 x 2
1
/
2
" long canopy screws
and lock washers provided with your Casablanca fan.
Tighten using the provided screwdriver until snug
against the ceiling.
NOTE: On sloped ceilings, align the canopy opening
with the top or peak of the room.
CANOPY HARDWARE
(not to scale)
Canopy
Canopy Hatch
Phillips
Screwdriver
Canopy Screws
and Washers (4)
CANOPY
LOCK WASHERS
CANOPY SCREWS
