14
GLASS INSTALLATION
Install Halogen Bulbs
Step 14.
Screw the two bulbs into the light fi xture as
shown in Figure #1.
NOTE:
When replacing the bulbs, be sure to use only
50-watt maximum.
Glass Installation
Step 15a.
Insert the threaded rod through the hole in
the glass shade, as shown in Figure #2.
Step 15b.
Thread the fi nial onto the threaded rod.
Tighten securely, as shown in Figure #3.
HARDWARE
(not to scale)
Glass Shade
CAUTION: Overtightening the finial can
cause the glass to break.
Finial
(2) 50-watt
Halogen Bulbs
Figure #1
Figure #2
Figure #3
GLASS
FINIAL
IMPORTANT! When installing a halogen bulb,
carefully cut off the end of the plastic sleeve
the bulb comes in and hold the bulb by the
plastic sleeve to screw it into the socket.
NOTE: In compliance with US Federal Energy
Regulations, this ceiling fan contains a device
that restricts the light kit to a maximum of 190
watts. Exceeding that limit or the marked limit
on this product may result in a fi re hazard or
improper operation.
