Floor Lamp with Shelving K066
Instructions for Use
Please read and retain these instructions for future reference
v002:19/11/21
•
To switch on the light, pull the cord (15). Note: if the cord is difficult to operate from its original hole,
feed the cord through one of the other 3 holes.
Cleaning and Maintenance
•
Unplug the lamp before cleaning.
•
Use a clean, dry, soft, lint-free cloth.
•
Do not use water or other chemical cleaning agents.
Step 5
Insert the four small plastic anchors (12) into the
small holes near the corners of the lamp holder
board (7). Unfold fabric shade (11) and place
through the top frame (9) down onto the lamp
holder board (7) outside of the four small plastic
anchors (12). Use plastic cord clips (13) to secure
the electric cord to the poles along the side. See
diagram below:
