Floor Lamp with Shelving K066
Instructions for Use
Please read and retain these instructions for future reference
v002:19/11/21
Step 1.
Holding bottom board (3) upside down, insert four
screws (2) through the holes in the four corners
and tighten into four long poles (4) so that the
screw heads are recessed into the bottom board
(3), place round the cushions (1) to cover the four
holes, turn this completed section right-side up.
Screw four double sided screws (5) into top of the
four long poles (4). Place first shelf board (6) onto
four protruding double-sided screws (5).
Step 2
Screw four long poles (4) onto the protruding
double-sided screws (5). Screw four double-sided
screws (5) into the top of the four long poles (4).
Place second shelf board (6) onto four protruding
double-sided screws (5).
Step 3
Screw four long poles (4) onto the protruding
double-sided screws (5). Screw four double-sided
screws (5) into top of the four long poles (4). Place
lamp holder board (7) onto four protruding double-
sided screws (5). Attach the lamp holder to this
lamp holder board (7) by inserting the base screw
of the lamp holder through the lamp holder board
(7) and securing it with the wing nut (14)
underneath the lamp holder board (7).
Step 4
Screw four short poles (8) onto the double-sided
screws (5). Place top frame (9) onto the four poles;
Insert four screws (2) through the holes in the four
corners and tighten into four short poles (8), so
that the screw-heads are recessed into the top
frame (9). Place small plastic caps (10) into
recessed holes in the four corners.
