CAS CBL Series, Руководство пользователя

Страница: 21 / 35

22
PCS(No. of pieces) SETTING
This balance can perform No. of pieces measurement(unit PCS.)
No. of standard pieces is 10 pcs, 20 pcs, 50 pcs or 100 pcs. When the No. of pieces is
increased, the accuracy is improved.
Step
(1) Register the PCS unit following the unit registration. (Refer to “8.
Registration, cancel, and change of unit”.) When PCS unit has been
already registered, it is not necessary to register again.
(2) Place the tare on the pan and press the
TARE
key.
(3) Load the standard sample with required pieces.
(4) Check that the stability mark is lit.
(5) When pressing the
UNIT
key continuously, the display will change
as follows:
“ ”, “ ”
“ ”, “ ”
(6) Select the desired PCS display and press the
TARE
key.
(7) “ ” is displayed for several seconds and the balance enters
the PCS unit display. When the reference sample weight is less than
“readability x No. of set pieces”, the PCS setting is not made. In this
case, “
” is displayed for several seconds and the
balance returns to weight display.