CAS BW-15, Руководство пользователя

Страница: 24 / 35

25
HOW TO INSTALL THE BW
1. Open the box with care because indicator is connected to the scale with load cell wire.
2. Turn the post knob so as to fix indicator.
3. Pull down the wire out of post pipe and insert the post pipe to the post
bracket. (Refer to fig. 1)
4. Fasten the post pipe with two bolts. (Refer to fig. 1)
5. A long bolt should be connected to the upper side.
6. Insert the wire to the post pipe. (Refer to fig. 2, 3)
7. If the scale is not properly level, please adjust 4 leg(adjusting bolt) at the bottom of
the scale so as to center the bubble of the leveling gauge.
Note : Place the scale on a flat and stable surface. Inside the indicated circle.