CAS BP-1100PLUS, Руководство пользователя

Страница: 28 / 39

3) Auto Sensing
Printer can automatically detect the label and store the result of detecting. By
doing this, the printer will calibrate the printing position of the label and the
user can do printing without setting the label length.
To perform the Auto Sensing, please do as follows:
1. Check if the label is correctly loaded on the printer.
2. Power off the printer, press and hold the FEED key.
3. Power on the printer while still holding the FEED key. Keep holding the
FEED key, wait for the LED light turn to flash red and then release the
FEED key. Printer will automatically detect the label and record it.
4. A Self-Test page will be printed out after Auto Sensing is completed and
the printer goes back to standby mode.
4) Self-Test Page
The Self-Test page helps user to figure out whether the printer is operating
normally. Below are some general descriptions about the content of Self-Test
page:
.
29