background image

1.8  CLEANING & MAINTENANCE

 

WARNING:    Unplug  and  disconnect  the  cooler  from  the  power  source  before  attempting 
any maintenance or service.

 

WARNING:

 

· 

Before cleaning  the  unit, switch  it  to  the  ''off''  position  and  remove  the plug  from  the  power 
socket.

 

· 

To clean the outside, use a damp cloth to remove dirt and dust.

 

· 

Never use detergents, corrosive elements or any chemicals to clean this product.

 

· 

When the product is not in use, store the unit in a dry place out of direct sunlight to clean this 
product.

 

CLEANING AND DRAINING THE WATER TANK:

 

· 

To  refill  the  tank  during  operation,  turn  the  power  ''OFF''  and  disconnect  the  unit  from  the 
power supply.

 

· 

To clean the water tank, turn the unit ''OFF'' and disconnect the power supply. Move the unit 
to  a  location  where  it  can  be  drained  and  remove  the  drain  plug  (see  number  12  on  parts 
description). Once the tank is empty, refill it with clean water and drain it again. This should 
be repeated weekly  to maintain the integrity of the unit and to remove particles filtered from 
the air.

 

· 

Once the tank is clean, refill the water tank. The unit is now ready to be used again.

 

MAINTAING AND CHANGING THE HONEYCOMB:

 

· 

The appliance is supplied with Honeycomb cooling media.

 

· 

Draining  the  water  reservoir  and  refilling  with  fresh  water  at  least  once  a  week  will  greatly 
reduce mineral deposits in the pads and help to extend the life of Honeycomb cooling media.

 

· 

Do not run the unit in COOL mode with stale water in the tank.

 

· 

It  is  recommended  to  empty  the  tank  and  refill  it  with  fresh  water  if  the  water  has  been 
standing in the tank for an extended period of time.

 

· 

The frequency for cleaning depends on local air and water conditions. For example, in areas 
where mineral content of the water is high, deposits may build up in the Honeycomb cooling 
media, restricting  air flow.  In  this case,  it  is  recommended to  clean  the  Honeycomb cooling 
media every two months.

 

· 

For best results, allow the Honeycomb cooling media to dry after each use by turning off the 
cool function 15 minutes before turning the unit off.

 

11

Содержание EC60PM








Отзывы: