SHENZHEN FLYING INDUSTRY DEVELOPMENT CO.,LTD
Http://www.carymart.com E-Mail: [email protected]
5) If you want to set the button 4 for 4 times of vibration: Press the learning button four times in the vibrator, and the vibrator vibrates once. Then
press the button 4 on the transmitter, if the vibrator again vibrates once, it means learning is successful.
6) If you want to set the button N for X times of vibration: Press the learning button X times in the vibrator, and the vibrator vibrates once. Then press
the button N on the transmitter, if the vibrator again vibrates once, it means learning is successful.
Delete all transmitters:
We have learned the transmitter to the vibrator. If you don’t want the vibrator to work with the transmitter, you can delete all codes of the transmitters,
which are stored in the vibrator.
Operation: Press and hold the learning button in the vibrator for about 6 seconds until the vibrator stops vibration; then release the learning button.
This means all stored codes have been deleted successfully.
