CONTROLS AND DISPLAYS
REMOTE CONTROL
This section explains how to use the remote control to set up and operate the DMC-600 (600SE).
1.
POWER
: Use to turn the power on and off.
2.
PROGRAM
: Use to preset tracks to be played by keying in track
numbers. When operating the PROGRAM function, the player must be in
STOP mode.
3.
NUMBER
: Use the number buttons to select the desired track. Playback
starts from the selected track.
4.
TIME
: Use to display the remaining time of a track or display the total
remaining time of a disc.
5.
STOP
: Use to stop play.
6.
VOLUME -/+
: Decrease or increase volume for the analog outputs.
7.
PREVIOUS
: Use to jump to the start of the previous track.
8.
BRIGHT: Use to select the player displays various brightness levels or
turn the display off.
9.
INPUT SOURCE SELECTOR
: Use to select the desired input source.
10.
DELETE
: Use to clear a program.
11.
MUTE
: Use to mute sound. Press again to resume sound.
12.
RANDOM
: Use to play all the tracks on the disc once in random order.
13.
TUBE
: Use to select the DiO™ analog output sections between the
vacuum tube stage and solid state stage.
14.
REPEAT
: Use to repeat play. Press once for single track, press 2
nd
time
to repeat ALL, press 3
rd
time to clear.
15.
OPEN/CLOSE
: Use to open and close the disc holder.
16.
FORWARD
: Hold down to search forward for a passage.
17.
PLAY
: Use to start play.
18.
REVERSE
: Hold down to search backward for a passage.
19.
SRC
: Sample Rate Converter. Press to select a TruBit™ upsample-rate.
16
