UX600 SYSTEM SPECIFICATIONS
GENERAL:
Group / Channel selections: 6 Groups of 21 channels
Total Frequency settings:
1441 (0.025 Mhz increment)
RF Bandwidth: 36 MHz
RF Frequency Band: Labeled on each unit and packaging.
(subject to change according to FCC regulations)
UX600R RECEIVER
Reception format
Diversity- PLL Synthesized
Stability
+/- 0.005%
Image Rejection
>60 dB
RF Sensitivity
<-107dBµ for 12 dB S/N AD
Connection
20 pin PCB edgecard, 0.156” pitch.
Power Supply
Power through connector only
Audio Output
Output through connector only
Signal-to-noise
>105 dB
THD
<0.6% @ 1kHz
Dimensions
W: 3.30”
H: 1.22”
D: 4.15” overall
3.20” case only
Net Weight
4.3 oz
Accessories
UX600-KIT
(required for mounting in Carvin
mixers, holds up to 2 receivers)
UX600B BELT PACK TRANSMITTER
Input Connector
Mini-XLR
Audio Freq. Response 40-18,000Hz
RF Power Output
10mW or 50mW setting
Stability
± 10kHz
Frequency Deviation ± 48kHz
Spurious Emissions
< -50 dBC
Battery
AA 1.5V alkaline qty 2
Dimensions
2.45” x 3.875”x 0.94” (w/o clip or ant.)
Net Wt (no battery)
2.5 oz
UX600B ACCESSORIES:
UXGT
1/4” INSTRUMENT CABLE FOR UX600B
UX-HM3
HEADSET MIC FOR UX600B
UXLP1
LAVALIER MIC FOR UX600B
GETTING STARTED QUICKLY
If you’re like most new owners, you’re probably in a hurry to use your wireless sys-
tem. To start, you must have a Carvin UX600M or UX600B transmitter, and at least one
Carvin UX600R receiver (installed in a host unit for power and audio output).
If you have purchased this wireless system seperately, please start with the installation
procedure for the receiver on the back page of this manual.
If the unit has been pre-installed from the factory, you can follow these brief instruc-
tions to get you going quickly;
1.
BATTERY
Insert 2 fresh AA alkaline batteries into the transmitter.
2. CONNECT
(UX600B only) Connect the mic, or instrument cable to the Belt-pack.
3.
RECEIVER POWER ON
Turn down the volume of the unit the UX600R system
is mounted in. Make sure you are plugged in to the proper AC voltage and turn the main
unit power ON. The UX600R receiver will power on with the main unit.
4.
TRANSMITTER POWER ON
Press the power button on the end of the
UX600M mic or, on the top of the UX600B belt-pack transmitter. The LCD display should
turn on. (when ON: a quick press will MUTE on/off, HOLD to turn OFF)
5.
CHANNEL CHECK
Check that both the transmitter and receiver display the
same Group-Channel setting.
To change Group and Channel on UX600M, UX600B or UX600R:
Hold in the SET button until the display shows SETTING for one second, then the first
digit (Group) will be blinking.
Use the UP/DOWN buttons to match the Group on the transmitter and receiver.
Press SET to have the second digit (Channel) blinking, then use the UP/DOWN buttons
to match the channel. Press SET to save and exit.
If using multiple systems, each transmitter/receiver pair must be set to a different group-
channel setting.
6.
SOUND CHECK
Play the instrument or use the mic as intended. Gradually raise
the levels on the mixer to a comfortable volume. If distortion occurs, first try lowering the
mixer preamp. If distortion is still heard, adjust the UX600 level settings: UX600R(dB),
UX600M(dB), UX600B (SENSIT or ATT). Complete directions are inside this manual.
RECEIVING INSPECTION - read before getting started
INSPECT YOUR WIRELESS SYSTEM FOR DAMAGE which may have occurred during shipping.
If damage is found, please notify the shipping company and Carvin Audio immediately.
SAVE THE CARTON & ALL PACKING MATERIALS. In the event you have to re-ship your unit,
always use the original carton and packing material. This will provide the best possible protec-
tion during shipment. Carvin Audio and the shipping company are not liable for any damage
caused by improper packing.
SAVE YOUR INVOICE. It will be required for warranty service if needed in the future.
SHIPMENT SHORTAGE. If you find items missing, they may have been shipped separately.
Please allow several days for the rest of your order to arrive before inquiring.
RECORD THE SERIAL NUMBER on the enclosed warranty card or below on this manual for your
records. Keep your portion of the card and return the portion with your name and comments to us.
For your records, you may wish to record the following information.
Serial No._______________________ Invoice Date__________________
REGULATIONS AND SERVICING
This device complies with part 15 of the FCC Rules. Operation is subject to the condi-
tion that this device does not cause harmful interference.
CAUTION! Do not attempt to open the receiver or transmitter. To do so will void the
warranty, and may cause improper operation. The circuits inside the receiver and trans-
mitter have been precisely adjusted for optimum performance and compliance with fed-
eral regulations. Refer servicing to qualified service personnel. No user-serviceable parts
inside. Do not expose to rain or moisture.
WARRANTY
90 days on all electronic components. Does not cover broken parts caused by normal
wear or abuse.
UX600revC 27dec16
UX600
WIRELESS SYSTEM
INTRODUCTION
Congratulations on your purchase of the UX600 SERIES Professional Modular
Wireless System. The UX600R receiver connects through a modular plug and
is available pre-mounted in certain Carvin mixers, or may be purchased for
self-installation with the UX600-KIT (consult Carvin for compatibility). The S600
portable PA unit accepts the UX600R as a direct plug-in to it’s accessory port
without the kit.
The UX600R will connect with the UX600M handheld mic transmitter or the
UX600B belt-pack transmitter to complete the system. The headworn mic (UXH-S
or UXH-B black), cable for instrument (UXGT) and Lavaliere mic (UXL) are avail-
able options to the UX600B belt-pack system.
The receiver features UHF diversity reception. The antenna feeds two completely
independent RF receivers on the same frequency. Automatic logic circuitry continu-
ously compares and selects the superior signal to provide better sound quality and
reduce the possibility of interference and dropouts.
Backlit LCD displays on the receiver and transmitters display channel, group,
battery level and mute status, with 3-button access to frequency, channel and
level settings with LOCK mode to prevent accidental changes. The transmitters
also feature a quick mute feature, quieting the mic or beltpack with a short press
of the power button.
The UX600 system has 1441 user selectable frequencies, or you can select by 6
groups of 21 channels for ease of use with multiple systems.
UX600R
UX600B
UXGT
UXLP1
UXHM3
UX600M
UX600M HANDHELD MIC TRANSMITTER
Polar Pattern
Unidirectional
Audio Freq. Response 50-16,000Hz
RF Power Output
10mW or 50mW setting
Stability
± 10kHz
Frequency Deviation ± 48kHz
Spurious Emissions
< -50 dBC
Battery
AA 1.5V alkaline qty 2
Current Consumption 30 mA typical
Battery Life
Approx. 25 hours
Dimensions
10.3”L x 1.97” dia.
Net Wt (no battery)
12.5 oz
16262 WEST BERNARDO DR. SAN DIEGO, CA 92127
800-854-2235 CARVINAUDIO.COM
USER MANUAL
