background image

TRx3810A - 

VELA™

System Type:  

Active, 2500W X-Drive™ processed

   Vertical Array Element
Freq. Response:   

60 Hz – 16kHz (-10dB),

   70 Hz – 14kHz (-3dB)
with Bass Enhance: 

15Hz < normal

Coverage Pattern: 

100H x 40V single cabinet

Crossover Type:  

Active DSP Bi-amp

Crossover Frequency: 

400 Hz

DSP Contours:  

Live 1, Live 2, Playback 1, Playback 2

    (in Single and Dual presets)
Power:  

 

2500W 20ms burst (2000W LF/500W HF)

   1600W RMS (1250W LF, 350W HF)
Input Sensitivity:  

1.0, 1.2, 1.4, or 2.0 Vrms settings

Maximum Input signal: 

+12dBu

Maximum SPL:  

129dB single cabinet

LF Driver:   2x 10-inch Neodymium, 2.5-inch VC
MF/HF Driver:  

8x 3.5-inch

Enclosure:   Premium Russian Baltic Birch
Finish:  

 

Black DuraTec™

Grill:  

 

Black powder coated steel

Transport:   4 Recessed Steel Handles
Suspension: 

     

 

12 captive 3/8in-16 nut fly pts.

   SlideLock™ rigging
   Bottom 1-3/8-inch Pole Cup
Connectors:  

Signal In/Thru: XLR female/XLR male

Remote Level/Mute: 

Terminal block

AC IN/OUT:  

Neutrik™ PowerCon™, A-Type/B-Type

AC Power Requirement: 

TRx3810A: 120VAC 50/60Hz 600VA

   TRx3810A-E: 230VAC 50/60Hz 600VA
Dimensions, H x W x D: 

31.875 in x 12 in x 14.75in

   (810 mm x 310 mm x 375 mm)
Net Wt:        

  

66 lb (30 kg) with Flyware

Origin:  

 

Built in the USA

Accessories:  

SlideLockTBar Top-bar kit 3 lb (1.5kg)

   TCSHK58 5/8” Shackle 1.3 lb (0.5kg)
   CVTRX3810 vinyl backed nylon cover
   CBTRX3810 padded cover

76-03810A122216

REFER SERVICING TO QUALIFIED SERVICE 
PERSONNEL! THIS UNIT CONTAINS HIGH 
VOLTAGE INSIDE!

CAUTION

RISK OF ELECTRIC SHOCK

LIMITED WARRANTY

  Your Carvin Audio loudspeaker is guaranteed against failure for 5 YEARS unless otherwise 

stated. Carvin will service and supply all parts at no charge to the customer providing the unit 

is under warranty. Shipping costs are the responsibility of the customer. CARVIN DOES NOT 

PAY FOR PARTS OR SERVICING OTHER THAN OUR OWN. A COPY OF THE ORIGINAL 

INVOICE IS REQUIRED TO VERIFY YOUR WARRANTY. Carvin assumes no responsibility 

for horn drivers or speakers damaged by this unit. This warranty does not cover, and no liability 

is assumed, for damage due to: natural disasters, accidents, abuse, loss of parts, lack of rea-

sonable care, incorrect use, or failure to follow instructions. This warranty is in lieu of all other 

warranties, expressed or implied. No representative or person is authorized to represent or 

assume for Carvin any liability in connection with the sale or servicing of Carvin Audio products.

CARVIN SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES.

MAINTAINING YOUR EQUIPMENT

  Avoid spilling liquids or allowing any other foreign matter inside the unit. The panel of your unit 

can be wiped with a dry or slightly damp cloth in order to remove dust and bring back the new 

look. As with all pro gear, avoid prolonged use in caustic environments (salt air).  When used 

in such an environment, be sure the amplifier is adequately protected.

SERVICE:

In the USA, please go to www.carvinaudio.com
 

under “SUPPORT” click on “REPAIR INFORMATION”

Outside the USA: contact your dealer or go to http://www.carvinaudio.com
 

click on “DEALERS” for your nearest service center.

Include a written description of the problem with serial number and date of purchase.

SAFETY INSTRUCTIONS (EUROPEAN)

The conductors in the AC power cord are colored in accordance with the following code.

GREEN & YELLOW—Earth        BLUE—Neutral         BROWN—Live

U.K. MAIN PLUG WARNING: A molded main plug that has been cut off from the cord is 

unsafe. NEVER UNDER ANY CIRCUMSTANCES SHOULD YOU INSERT A DAMAGED OR 

CUT MAIN PLUG INTO A POWER SOCKET.

IMPORTANT!  FOR YOUR PROTECTION, PLEASE READ THE FOLLOWING:
WATER AND MOISTURE:  Appliance should not be used near water (near a bathtub, washbowl, sink, 
laundry tub, in a wet basement, near a swimming pool, etc). Care should be taken so that objects do not fall 
and liquids are not spilled into the enclosure through openings.
POWER SOURCES: The product should be connected to a power supply only of the type described in 
the operating instructions or as marked on the appliance.
GROUNDING OR POLARIZATION: Precautions should be taken so that the grounding or polarization 
is not defeated.
POWER CORD PROTECTION: Power supply cords should be routed so that they are not likely to be 
walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs.
SERVICING: The user should not attempt to service the appliance beyond that described in the operating 
instructions.  All other servicing should be referred to qualified service personnel.
FUSING: If your unit is equipped with a fuse receptacle, replace only with the same type fuse.  Refer to 
replacement text on the unit for correct fuse type.

This symbol is intended to alert 

the user to the presence of 

uninsulated “dangerous volt-

age” within the product’s enclo-

sure that may be of sufficient 

magnitude to constitute a risk of electric 

shock to persons.

This symbol is intended 

to alert the user to the 

presence of important 

operating and maintenance 

(servicing) instructions 

in the literature accompanying the 

appliance.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

VELA™ TRx3810A SINGLE CABINET FREQUENCY RESPONSE

SPECIFICATIONS

Содержание TRx3810A VELA









Отзывы: