25. Mono/sub control
A mono output is created from the L/R master
faders (post) for center, subwoofers, or side fill
speakers. The output is at the
Mono
/
Sub
XLR
connector (#37).
26. headphone/Meter source
The stereo
PHonES
control sets the level of the
PHonES
jack (#35). The
L/R
,
Mono, Mon 1-4 &
Sub 1-4
switches allow for monitoring of these
sources through the headphones and see the
levels on the
L/R
LED
METERS (#28).
27. pfl red led
indicates that the headphone & meters are monitor-
ing only the channels or groups where the
PFL
is
switched on.
28. l/r led vu Meters
This group of 10 LED’s offer 6 dB increment
resolution that give the operator a visual indication
of the mixer’s output levels, selectable by the METER
SOURCE or PFL switches (#26).
29. dual 9 band Graphic eQs
are
one octave filters at 63,125, 250, 500, 1k, 2k, 4k,
8k & 16k Hz centers that offer ±12dB adjustment
to enhance the main mix.
30. usb power port
This port su5V USB power to run accessories
like LED lighting or to charge MP3 players.
31. power blue led
Verifies the mixer
is on.
32. effects 1 & 2 output JacKs
1/4” outputs for external effects. Return stereo
effects into the stereo channels.
33. Monitor 1-4 Xlr outputs
XLR outputs provide balanced signals for con-
necting either powered monitors or power amps.
34. sub Group 1-4 output JacKs
4 balanced 1/4” outputs correspond to the 4 sub
group faders. Depending on the intended use of
the sub groups, connect multi-track recording
devices, powered speakers or power amps.
35. headphone JacK
1/4” stereo jack for headphone or control room
output.
36. left & riGht Xlr outputs
This set of balanced XLR connectors are for
connecting the main L/R output to power amps
or recording gear.
37. Mono/sub Xlr outputs
A bal. XLR output is featured for side fills or
subwoofers.
1
17
18
34
2
3
5
7
8
9
10
13
14
16
6
32
35
37
24
33
4
6
15
29
27
28
30
31
22
19
26
21
19
11
12
36
21
20
20
23
25
See Demo CARVINCHANNEL.COM
